Canada Nickel Announces Positive Initial Metallurgy Results at Crawford Nickel-Cobalt Sulphide Project

Highlights:

• Metallurgical testing confirms excellent nickel recovery of 46% and 51% from two locked cycle tests
  
  
• Conventional flowsheet employed with two stages of grinding, desliming, flotation and magnetic separation processes

TORONTO, Dec. 23, 2020 /CNW/ - Canada Nickel Company Inc. ("Canada Nickel" or the "Company") (TSXV:CNC) (OTCQB: CNIKF) is pleased to announce excellent results from metallurgical testing on its 100% owned Crawford Nickel-Cobalt Sulphide project.

Figure 1, 2 – Comparison of Current Locked Cycle Test Samples (Nickel and Sulphur Feed Grades) to Crawford Measured & Indicated (M&I) Resource Grades (CNW Group/Canada Nickel Company Inc.)

This first phase of metallurgical testing was designed to confirm initial flowsheet design, which uses a typical nickel sulphide ultramafic flowsheet of two stages of grind-deslime-float with magnetic separation to support recovery of magnetic minerals.  Subsequent testing during 2021 will continue to optimize various flowsheet parameters towards a final flowsheet for the feasibility study expected by year-end 2021.

"These metallurgical results are a critical step forward for the Crawford project. The 46% and 51% recovery from samples which bookend the grades in the higher-grade core compare very favourably to similar projects. The Company is incredibly pleased to deliver this excellent result in just six months, as a result of our team's deep experience and the similarity of this deposit to other projects," said Mark Selby, Chair & CEO.

"Several lab tests yielded a portion of recovered nickel with concentrate grades in excess of 30%.  The next phases of work will focus on continued flowsheet optimization and developing a broad base of test samples.  These are essential given the wide range of mineralogy in these types of deposits which typically results in nickel recoveries for a specific block ranging from 10-15% to as much as 60%."

The Crawford Nickel-Cobalt Sulphide Project is located in the heart of the prolific Timmins-Cochrane mining camp in Ontario, Canada, and is adjacent to well-established, major infrastructure associated with over 100 years of regional mining activity.  Canada Nickel has launched wholly-owned NetZero Metals Inc. with the aim to develop zero-carbon production of nickel, cobalt, and iron at the Crawford Project.

Table 1 – Metallurgy Test Results on Higher-Grade Core (HGC) samples for the Crawford Nickel-Cobalt Sulphide Project, Ontario

Locked Cycle Test	% Nickel Recovery	Concentrate Grades % Ni		Split of Recovered Nickel
		High Grade	Low Grade	High Grade	Low Grade
HGC-High	51%	28%	8%	57%	43%
HGC-Low	46%	28%	13%	32%	68%

Figure 1, 2 – Comparison of Current Locked Cycle Test Samples (Nickel and Sulphur Feed Grades) to Crawford Measured & Indicated (M&I) Resource Grades

Table 2 – Iron Recovery Results for the Crawford Nickel-Cobalt Sulphide Project, Ontario

	Fe Recovery %	Fe Concentrate Grade %	Ratio of Recovered Fe (in Magnetite) to Recovered Ni
HGC-High	41%	55%	15
HGC-Low	53%	46%	32

Cobalt recovery was approximately 17% for both locked cycle tests, which is expected given these samples contain primarily heazlewoodite (rather than pentlandite) which contains little cobalt.  PGM assays are pending.

Phase I Metallurgy Testing

Metallurgical recovery testing has been ongoing at COREM in Quebec City and XPS in Sudbury. Test work to date has been completed on multiple samples from the Crawford deposit totalling 630 kg of mineralized material from several large diameter holes drilled during 2020 and selected exploration drill core samples. The two samples selected for this current metallurgical work had nickel and sulphur grades which "bookended" the nickel and sulphur grades from the 280 million tonnes of Measured & Indicated resource in the Main Zone higher-grade core, which is expected to provide the bulk of the feed during the early mine life of the project.  More importantly, the lower grade sample also had nickel and sulphur grades which were similar to the current overall Measured & Indicated Resource for the 606 million tonnes of the project.

The first phase of testing focused on confirming the overall flowsheet design and leveraged work completed on several other projects.  The project is designed to deliver concentrates which are expected to be used in local processing facilities which would take advantage of the NetZero production potential of the project.  While the nickel concentrates could be utilized across a wide range of applications, the higher nickel/lower iron grade concentrate would be targeted at battery metal consumers, while the lower nickel/higher iron concentrate could be utilized to produce a 25-30% ferronickel product satisfying stainless steel consumers.  Given the ultramafic source of the material, magnesium oxide ("MgO") contents of the concentrate are high.  The high MgO content is not a factor in use for feeds in the stainless steel value chain in which all of the concentrate could be utilized (only nickel value of concentrate realized in this scenario – no cobalt or PGM credits).  If the high grade concentrate was processed in traditional sulphide concentrate facilities, MgO penalties would be incurred but could be partially or entirely offset by the relatively very high nickel grade of the concentrate and potential cobalt and PGM credits.

The current flowsheet is primarily comprised of two stages of grind-deslime-float.  The first stage is a relatively coarse grind of 135-150 microns and the second stage, which follows a magnetic separation step which reduces the feed to 25-30% of the initial plant feed, and is then ground to 45 microns.  The concentrates (making up less than 2% of the initial feed) is then reground and floated to generate higher and lower grade nickel concentrates.  The magnetic tailings then undergo a multi-stage magnetic cleaning to deliver a target 45-50% iron magnetite concentrate (focus on maximizing recovery rather than grade as magnetite is expected to be processed locally).

Phase II Metallurgy Testing

Metallurgy testing during 2021 will have two key areas of focus.  The first area of focus will be continued optimization of both the recovery and concentrate grades and the amount of grinding and reagents utilized to produce these concentrates.  The second area of focus will be continuing ongoing lab work which has highlighted the improved recovery potential from using coarser grind sizes and more aggressive desliming, to recover much of the nickel into a very high grade (nickel > 30%) concentrate as well as the potential to improve nickel recovery from the slimes portion of the material produced.

Qualified Person and Data Verification

Stephen J. Balch P.Geo. (ON), VP Exploration of Canada Nickel and a "qualified person" as such term is defined by National Instrument 43-101, has verified the data disclosed in this news release, and has otherwise reviewed and approved the technical information in this news release on behalf of Canada Nickel Company Inc.

About Canada Nickel Company

Canada Nickel Company Inc. is advancing the next generation of nickel-cobalt sulphide projects to deliver nickel and cobalt required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel Company has applied in multiple jurisdictions to trademark the terms NetZero Nickel^TM, NetZero Cobalt^TM, NetZero Iron^TM and is pursuing the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Canada Nickel provides investors with leverage to nickel and cobalt in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins-Cochrane mining camp. For more information, please visit www.canadanickel.com.

Cautionary Statement Concerning Forward-Looking Statements

This press release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, mineral resource estimates relating to the Crawford Nickel-Cobalt Sulphide Project, the potential of the Crawford Nickel-Cobalt Sulphide Project, strategic plans, including future exploration and development results, and corporate and technical objectives. Forward-looking information is necessarily based upon a number of assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Factors that could affect the outcome include, among others: future prices and the supply of metals, the future  demand for metals, the results of drilling, inability to raise the money necessary to incur the expenditures required to retain and advance the property, environmental liabilities (known and unknown), general business, economic, competitive, political and social uncertainties, results of exploration programs, risks of the mining industry, delays in obtaining governmental approvals, and failure to obtain regulatory or shareholder approvals. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Canada Nickel disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.

SOURCE Canada Nickel Company Inc.

Mark Selby, Chair and CEO, Phone: [phone], Email: [email protected]