Cantex intersects 18.15 metres (12.61 metres true width) of 33.82% lead-zinc with 95.62 g/ton silver at North Rackla

KELOWNA, BC, Jan. 30, 2020 /CNW/ - Cantex Mine Development Corp. (CD: TSXV) (the "Company") has released an update on the work program at its Massive Sulphide project within its 100-per-cent-owned 14,077 hectare North Rackla claim block where drill results continue to define a lead-zinc-silver mineralized system with Broken Hill Type (BHT) affinities.

Dr. Chuck Fipke reports

Figure 1. Drilling plan view (CNW Group/Cantex Mine Development Corp.)

Figure 2. Drill pad MZ33 section (CNW Group/Cantex Mine Development Corp.)

Figure 3. Drill pad MZ34 Section (CNW Group/Cantex Mine Development Corp.)

HIGHLIGHTS

• Drilling at pads MZ31, MZ32, MZ33, MZ34 and MZ39B has intersected significant lead-zinc-silver mineralization within the Main Zone
• Highlights include YKDD19-146 (12.61m true width of 13.21% lead, 20.61% zinc and 95.62 g/t silver) at pad MZ33, and YKDD19-156 (8.08m true width of 4.9% lead, 10.93% zinc and 62.58 g/t silver) at pad MZ34. These spectacular high-grade intersections occur 970 to 1,000m ENE of previously reported high-grade intercepts at pads MZ3, MZ4, MZ5 and MZ6.
• Results continue to confirm the presence of a large-scale mineralizing system within a marine sedimentary sequence of Proterozoic age

MAIN ZONE RESULTS

Assay results have been now been received from 49 holes drilled from 15 Pads.  The pad locations are presented in Figure 1.  Significant results are reported below in Table 1.  Where noted, some of the holes presented in the table have additional intervals for which assays are still pending.  These results, along with those from additional holes yet to be analyzed, will be reported when received.  

Table 1.  Significant drill results

Pad	Dip	Hole	From	To	Length	True	Silver	Lead +	Lead	Zinc	Copper	Mn
						Width		Zinc
			(m)	(m)	(m)	(m)	(g/t)	(%)	(%)	(%)	(%)	(%)
MZ39B	-45	YKDD19-119	9.20	42.20	33.00	27.99	14.95	6.96	2.48	4.48	0.06	4.76
		including	30.50	35.70	5.20	4.41	31.40	21.82	7.65	14.17	0.03	4.47
	-71	YKDD19-121	29.10	47.00	17.90	9.75	3.96	3.04	0.83	2.21	0.00	1.03
			50.30	51.80	1.50	0.82	3.14	2.16	0.41	1.75	0.03	3.55
			82.80	84.70	1.90	1.03	51.50	0.02	0.00	0.02	1.98	2.59
MZ34	-45	YKDD19-153	Additional results pending
			233.40	234.40	1.00	0.89	60.40	12.59	4.94	7.65	0.32	1.43
			237.15	238.00	0.85	0.76	0.59	3.01	0.01	3.00	0.01	0.20
			240.10	241.60	1.50	1.34	0.61	1.41	0.04	1.37	0.00	0.36
			300.25	303.00	2.75	2.45	5.24	4.86	1.05	3.81	0.01	0.18
	-62	YKDD19-156	Additional results pending
			270.65	287.50	16.85	12.72	44.70	10.67	3.20	7.47	0.08	4.10
		Including	272.80	283.50	10.70	8.08	62.58	15.83	4.90	10.93	0.06	5.02
MZ33	-45	YKDD19-144	Additional results pending
			148.60	149.50	0.90	0.79	21.10	7.22	2.39	4.83	0.08	1.74
			152.00	155.00	3.00	2.65	7.82	2.42	0.38	2.04	0.02	3.82
			172.30	176.20	3.90	3.44	129.00	1.80	0.42	1.38	1.35	3.43
			185.60	186.30	0.70	0.62	3.83	1.55	0.37	1.18	0.00	0.87
			228.85	233.00	4.15	3.66	10.14	13.12	0.68	12.44	0.04	4.50
	-62	YKDD19-146	Additional results pending
			186.60	188.30	1.70	1.18	12.71	10.40	1.57	8.83	0.02	2.05
			218.80	220.20	1.40	0.97	0.80	1.34	0.08	1.26	0.00	0.64
			222.60	240.75	18.15	12.61	95.62	33.82	13.21	20.61	0.07	2.23
			360.60	361.55	0.95	0.66	24.50	7.45	1.65	5.80	0.21	2.33
			392.20	392.70	0.50	0.35	7.17	3.23	0.23	3.00	0.03	1.12
			412.25	413.60	1.35	0.94	53.79	4.75	2.73	2.02	0.53	4.64
			452.25	453.00	0.75	0.52	1.11	1.45	0.14	1.31	0.00	0.22
	-70	YKDD19-149	Additional results pending
			149.30	149.90	0.60	0.34	3.87	1.70	0.03	1.67	0.00	0.34
			223.25	224.80	1.55	0.89	13.69	9.01	1.23	7.78	0.02	0.16
			232.20	233.00	0.80	0.46	4.07	1.46	0.22	1.24	0.00	0.24
			235.70	240.10	4.40	2.52	12.08	8.71	0.29	8.42	0.02	0.34
			284.65	287.80	3.15	1.81	10.10	3.62	0.40	3.22	0.28	2.19
			291.00	292.10	1.10	0.63	8.68	3.86	0.07	3.79	0.01	3.85
			335.30	337.60	2.30	1.32	5.34	2.54	0.25	2.29	0.01	2.40
			342.00	345.05	3.05	1.75	7.58	4.51	0.23	4.28	0.04	3.86
			375.95	377.40	1.45	0.83	5.93	2.55	0.27	2.28	0.03	2.09
			484.85	485.45	0.60	0.34	47.00	11.53	7.00	4.53	0.03	3.60
			490.80	493.40	2.60	1.49	91.32	9.03	3.29	5.74	0.37	3.44
	-80	YKDD19-155	Additional results pending
			351.80	352.35	0.55	0.28	10.30	0.19	0.06	0.13	1.21	2.38
			353.15	364.80	11.65	5.83	38.14	11.41	3.37	8.04	0.22	2.68
		Including	355.90	362.70	6.80	3.4	57.67	16.40	5.43	10.97	0.28	2.25
			420.70	421.75	1.05	0.53	5.72	3.35	1.11	2.24	0.00	0.41
MZ32	-45	YKDD19-098	113.90	114.60	0.70	0.59	3.61	1.26	0.10	1.16	0.04	1.11
			120.60	125.30	4.70	3.99	22.28	3.01	0.53	2.48	0.15	3.76
			134.00	141.20	7.20	6.11	13.39	5.24	1.58	3.66	0.03	4.55
			146.20	148.60	2.40	2.04	156.99	12.46	9.08	3.38	1.73	2.04
			150.20	152.00	1.80	1.53	6.50	3.03	0.05	2.98	0.01	1.22
			176.90	178.30	1.40	1.19	15.26	6.06	0.42	5.64	0.01	0.52
			183.70	184.30	0.60	0.51	1.96	1.73	0.25	1.48	0.00	0.37
			302.00	304.50	2.50	2.12	2.45	1.37	0.17	1.20	0.04	1.45
			307.80	308.60	0.80	0.68	2.94	1.78	0.33	1.45	0.00	0.25
	-62	YKDD19-107	Results pending
	-70	YKDD19-112	Additional results pending
			171.00	173.00	2.00	1.06	5.10	2.71	0.25	2.46	0.03	0.50
			220.70	222.50	1.80	0.95	2.11	5.32	0.01	5.31	0.01	4.57
			224.90	226.00	1.10	0.58	9.03	2.32	0.78	1.54	0.04	1.65
			253.30	254.40	1.10	0.58	4.52	4.29	0.01	4.28	0.01	0.39
			326.00	326.60	0.60	0.32	10.95	2.00	0.91	1.09	0.07	0.95
			467.40	468.40	1.00	0.54	2.08	1.16	0.16	1.00	0.01	0.53
			487.80	488.80	1.00	0.54	11.05	1.49	0.15	1.34	0.07	2.02
			493.60	494.20	0.60	0.33	318.00	1.62	0.36	1.26	1.55	1.86
	-80	YKDD19-117	Additional results pending
			308.10	318.00	9.90	3.71	5.59	2.36	0.04	2.32	0.08	3.08
		Including	316.00	317.00	1.00	0.37	4.27	11.79	0.04	11.75	0.05	2.73
			324.00	325.00	1.00	0.37	1.29	2.02	0.04	1.98	0.01	4.61
			348.00	350.00	2.00	0.75	3.26	1.83	0.00	1.83	0.00	2.32
MZ31	-45	YKDD19-148	111.40	112.50	1.10	0.99	2.46	2.38	0.37	2.01	0.02	1.37
			128.65	129.35	0.70	0.63	8.55	2.59	2.13	0.46	0.05	4.01
			132.30	135.20	2.90	2.61	18.58	3.82	3.42	0.40	0.06	4.65
	-62	YKDD19-151	127.50	128.55	1.05	0.80	0.34	1.07	0.00	1.07	0.00	0.50
			136.90	138.40	1.50	1.15	1.03	1.78	0.02	1.76	0.01	1.54
			141.00	141.80	0.80	0.61	4.02	2.78	0.22	2.56	0.06	3.24
			148.70	149.30	0.60	0.46	0.70	1.11	0.04	1.07	0.01	4.71
			154.10	156.90	2.80	2.14	33.10	18.02	5.07	12.95	0.04	3.59
			164.55	165.95	1.40	1.07	10.30	11.36	1.69	9.67	0.03	3.37
			169.15	173.55	4.40	3.37	14.62	6.94	1.69	5.25	0.07	3.34
			182.30	183.50	1.20	0.92	0.61	2.45	0.01	2.44	0.01	0.56
	-70	YKDD19-152	Results pending
	-80	YKDD19-154	69.85	70.40	0.55	0.20	12.25	1.35	1.31	0.04	0.00	0.49
			298.80	299.35	0.55	0.20	1.66	4.58	0.00	4.58	0.01	5.83
			316.50	317.10	0.60	0.22	5.94	1.85	0.35	1.50	0.02	2.77
MZ 27	-45	YKDD19-077	No significant results
	-62	YKDD19-080	No significant results
	-70	YKDD19-083	128.70	131.20	2.50	1.83	3.73	1.34	0.09	1.25	0.04	1.64
			133.70	135.20	1.50	1.10	2.04	1.47	0.14	1.33	0.01	3.19
		YKDD19-086	No significant results
	-80	YKDD19-087	165.00	166.10	1.10	0.60	15.70	24.37	4.27	20.1	0.05	2.03
	-90	YKDD19-091	No significant results
MZ26	-44	YKDD19-049	No significant results
	-62	YKDD19-053	102.00	104.00	2.00	1.26	85.90	0.59	0.09	0.50	0.81	2.63
			160.00	161.00	1.00	0.62	24.90	1.98	0.99	0.99	0.20	2.60
	-70	YKDD19-056	No significant results
	-80	YKDD19-058	209.00	210.00	1.00	0.41	2.50	3.15	0.09	3.06	0.02	2.13
	-90	YKDD19-063	No significant results
MZ25	-44	YKDD19-074	No significant results
	-62	YKDD19-076	117.80	119.70	1.90	1.27	58.14	0.46	0.14	0.32	0.99	3.49
			130.20	130.80	0.60	0.4	28.00	4.55	3.47	1.08	0.00	0.55
	-70	YKDD19-078	No significant results
	-80	YKDD19-081	No significant results
MZ17	-42	YKDD19-031	70.60	76.60	6.00	3.86	8.62	5.47	3.03	2.45	0.01	1.23
		including	72.10	73.10	1.00	0.64	41.00	22.93	16.75	6.18	0.02	2.79
			97.70	99.70	2.00	1.29	5.67	5.28	1.29	3.99	0.01	1.95
	-41	YKDD19-035	14.00	17.00	3.00	1.93	2.27	1.74	0.21	1.53	0.00	0.29
			317.70	318.80	1.10	0.71	7.77	2.38	0.51	1.87	0.03	3.06
MZ17B	-52	YKDD19-069	15.00	16.10	1.10	0.52	89.00	15.73	11.65	4.08	0.05	4.38
			210.90	211.90	1.00	0.47	2.84	1.31	0.25	1.06	0.00	0.94

As presented above, greater than 10% combined lead-zinc was intersected in drilling from pads MZ39B, MZ34, MZ33, MZ32 and MZ31.  These pads are located over 370 metres of strike length, being 1250, 1000, 970, 930, and 880 metres to the ENE of pad MZ6 respectively.  Holes YKDD19-155 and YKDD19-156 were the last holes drilled during the season, and both intersected significant mineralization. 

YKDD19-155 was drilled at a -80 degree dip and intersected 5.83 metres (true width) of 11.41% combined lead-zinc with 38.14 g/t silver.  This was at a vertical depth of nearly 360 metres.  The cross section of MZ33 showing this result is presented in Figure 2 along with the 12.61 metre (true width) intercept from the -62 degree hole YKDD19-146 containing 33.82% combined lead-zinc with 95.62 g/t silver.

YKDD19-156 was drilled at a -62 degree dip and intersected 8.08 metres (true width) of 15.83% combined lead-zinc with 62.58 g/t silver.  A cross section through MZ34 showing this results is presented in Figure 3.

In addition to the above, results were received from 13 holes drilled from pads MZ11, MZ12 and MZ13 which tested portions of the previously discussed dyke swarm, which we believe remobilized the massive sulphides to locations adjacent to the dyke swarm that have not yet been intersected by drilling.

The core displays numerous faults and local outcropping rocks are folded.  As is the case at Broken Hill, faults and folds locally change the location of massive sulphide units.  As the massive sulphides are covered by talus and glacial till and cannot be detected by ground gravity, electromagnetic, induced polarization, resistivity or magnetic geophysical surveys we have note yet been able to intersect massive sulphides in the vicinity of the aforementioned drilling from pads MZ11, MZ12 and MZ13 as well as in two holes drilled from pad 38 and one hole drilled from pad 42.  Locations of these pads are presented in Figure 1.

The drill holes reported in this press release were drilled using HQ (63.5mm) diamond drill bits.  The core was logged, marked up for sampling and then divided into equal halves using a diamond saw on site.  One half of the core was left in the original core box.  The other half was sampled and placed into sealed bags which were in turn placed into larger bags closed with security seals prior to being transported to CF Mineral Research Ltd in Kelowna, BC.

At CF Minerals the samples were dried prior to crushing to -10 mesh.  The samples, which averaged over 3kg, were then mixed prior to splitting off 800g.  The 800g splits were pulverized to -200 mesh and a 250g split was sent for assay.  Quality control procedures included the insertion of coarse quartz samples to assess the sample preparation.  Silica blanks were inserted along with certified reference samples.  These quality control samples were each inserted approximately every 20 samples.

ALS Chemex in Vancouver assayed the samples using a four-acid digestion with an ICP-MS finish.  The 48 element ME-MS61 technique was used to provide a geochemical signature of the mineralization.  Where lead or zinc values exceeded one percent the Pb-OG62 or Zn-OG62 techniques were used.  These have upper limits of 20% lead and 30% zinc respectively.  Samples with lead and zinc values over these limits are then analyzed by titration methods Pb-VOL70 and Zn-VOL50.  The over limit analyses (and the over limit – over limit analyses) contribute to delays in receiving final assay results.

DISCUSSION

Drill results continue to demonstrate the extensive trend of the Main Zone high-grade lead-zinc-silver mineralization at the Company's Massive Sulphide project, which is believed to be of sedimentary exhalative (sedex) origin.  Mineralization is coarsely crystalline and appears to be stratabound, showing evidence of recrystallization during mild metamorphism. Based on a combination of multiple factors (the nature of the sedimentary host sequence, the Proterozoic age, the elevated manganese levels, and the high silver content), the North Rackla mineralization is believed to belong to the BHT (Broken Hill type) sub-class of sedex lead-zinc-silver deposits.  The Broken Hill massive sulphide deposit has been mined for more than 100 years and produced some of the highest lead-zinc-silver grades in the world.  It is the founding deposit of BHP, the world's largest mining company.

The high grades being encountered clearly demonstrate the fertile nature of this large-scale system. Structural and geochemical data are being compiled in order to guide the focus of future drilling within the Main Zone sequence.

In addition, CEO Chad Ulansky states, "As planned, our field teams moved onto the flatter, till covered ground in the vicinity of the camp with the onset of winter.  This drilling was very successful, intersecting massive sulphides from multiple drill pads.  Our last holes of the season intersected high-grade mineralization, which is open both along strike and to depth giving the project an exciting point to commence its 2020 drill program."

The Company continues to be impressed by the results and potential of the project and looks forward to the coming drill program.

The technical information and results reported here have been reviewed by Mr. Chad Ulansky P.Geol., a Qualified Person under National Instrument 43-101, who is responsible for the technical content of this release.

Signed,

Charles Fipke

Charles Fipke
Chairman

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Information set forth in this news release includes forward-looking statements under applicable securities laws. Forward-looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often address expected future business and financial performance, and often contain words such as "anticipate", "believe", "plan", "estimate", "expect", and "intend", statements that an action or event "may", "might", "could", "should", or "will" be taken or occur, or other similar expressions. All statements, other than statements of historical fact, included herein including, without limitation; statements about the terms and completion of the proposed sale transaction are forward-looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, risks identified in the management discussion and analysis section of the Company's interim and most recent annual financial statement or other reports and filings with Canadian securities regulators. Forward looking statements are made based on management's beliefs, estimates and opinions on the date that statements are made and the respective companies undertakes no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward-looking statements.

SOURCE Cantex Mine Development Corp.

Cantex Mine Development Corp, Tel: [phone]; Email: [email protected]

Related Links

http://www.cantex.ca