Cantex Intersects 28.3 Metres (True Width of 14.15 Metres) of 114g/t Silver, 9.34% Lead and 12.37% Zinc at North Rackla, Yukon
/THIS NEWS RELEASE IS NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR DISSEMINATION IN THE UNITED STATES./
KELOWNA, BC, Sept. 5, 2019 /CNW/ - Cantex Mine Development Corp. (CD: TSXV) (the "Company") is pleased to provide an update on the work program at its Massive Sulphide project within its 100% owned 14,077 hectare North Rackla claim block.
Drilling
62 holes totalling over 14,000 metres have been completed on the 2.4 km long Massive Sulphide Zone so far this season. These holes have been drilled from 14 pads stretching along a strike length of 760 metres (or approximately 30% of the 2.4km strike length) within the Main Zone. The deepest sulphide intersection to date has been at 335 metres vertically below surface. Results have been received for holes totaling 2,648 metres. A map showing the pad locations on the Main Zone is presented on the Company's website (www.cantex.ca).
Extension Zone Highlights
Hole |
Pad |
Dip |
From |
To |
Length |
True |
Silver |
Lead |
Zinc |
Copper |
Manganese |
YKDD19-040 |
5 |
-62o |
30.1 |
56.6 |
26.5 |
16.32 |
153.57 |
3.10 |
2.44 |
0.42 |
4.09 |
YKDD19-042 |
5 |
-70o |
32.7 |
61.0 |
28.3 |
14.15 |
113.96 |
9.34 |
12.37 |
0.09 |
3.05 |
Including |
36.1 |
37.1 |
1.0 |
0.50 |
134.00 |
56.59 |
0.40 |
0.03 |
4.32 |
||
And |
46.0 |
50.0 |
4.0 |
2.00 |
150.50 |
7.39 |
36.96 |
0.05 |
2.53 |
||
And |
56.0 |
59.0 |
3.0 |
1.50 |
213.33 |
10.73 |
41.43 |
0.10 |
1.41 |
||
YKDD19-043 |
5 |
-78o |
61.8 |
84.4 |
22.6 |
8.47 |
48.20 |
8.20 |
4.90 |
0.04 |
3.20 |
Including |
61.8 |
64.8 |
3.0 |
1.12 |
55.33 |
21.91 |
1.48 |
0.01 |
4.07 |
||
And |
72.2 |
73.3 |
1.1 |
0.41 |
235.40 |
49.30 |
3.72 |
0.11 |
1.99 |
||
And |
75.3 |
78.4 |
3.1 |
1.16 |
97.47 |
6.87 |
21.23 |
0.05 |
3.02 |
Drilling this season has focused on extending the mineralization along strike from the heavy massive sulphides intersected in 2018 (see news releases dated November 20, 2018) from Pad 6.
Moving along strike further to the northeast, heavy sulphide mineralization has been logged in a fan of four drill holes from Pad 26, located 625 metres northeast of Pad 6. Results for these holes are pending.
To the southwest, along strike from Pad 6, drilling in 2019 has been conducted from Pads 5, 4 and 3 which are 32, 82 and 129 metre step-outs respectively from Pad 6.
From Pad 5, holes YKDD19-039, YKDD19-040, YKDD19-042 and YKDD19-043 were drilled at an azimuth of 150 degrees. An additional hole from Pad 5 was drilled at a -88 degree dip which also intersected heavy massive sulphides between 103 and 135 metres for which assays are awaited. The mineralization in the shallowest hole, YKDD19-039, was oxidized as reflected in its lower metal content. As shown in the results table, exceptional silver, lead and zinc values continue to be intersected in fresh mineralization along strike to the southwest of the Main Zone.
Similar fans of five holes were completed from each of Pads 4 and 3. Heavy massive sulphides were logged in all ten holes and results are awaited.
Additional maps and sections are presented on the Company's website www.cantex.ca.
Summary
Cantex is extremely encouraged from the initial 2019 results which confirm last year's exciting world class discovery. Continuity along strike, depth and exceptional widths are confirmed as well as very high grades.
Quality Controls / Qualified Person
The drill holes reported in this press release were drilled using HQ (63.5mm) diamond drill bits. The core was logged, marked up for sampling and then divided into equal halves using a diamond saw on site. One half of the core was left in the original core box. The other half was sampled and placed into sealed bags which were in turn placed into larger bags closed with security seals prior to being transported to CF Mineral Research Ltd in Kelowna, BC.
At CF Minerals the samples were dried prior to crushing to -10 mesh. The samples, which averaged over 3kg, were then mixed prior to splitting off 800g. The 800g splits were pulverized to -200 mesh and a 250g split was sent for assay. Quality control procedures included the insertion of coarse quartz samples to assess the sample preparation. Silica blanks were inserted along with certified reference samples. These quality control samples were each inserted approximately every 20 samples.
ALS Chemex in Vancouver assayed the samples using a four-acid digestion with an ICP-MS finish. The 48 element ME-MS61 technique was used to provide a geochemical signature of the mineralization. Where lead or zinc values exceeded one percent the Pb-OG62 or Zn-OG62 techniques were used. These have upper limits of 20% lead and 30% zinc respectively. When these upper limits were exceeded the samples were analyzed by titration methods Zn-VOL50 and Pb-VOL70.
The technical information and results reported here have been reviewed by Mr. Chad Ulansky P.Geol., a Qualified Person under National Instrument 43-101, who is responsible for the technical content of this release.
Signed,
Charles Fipke
Charles Fipke
Chairman
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Information set forth in this news release includes forward-looking statements under applicable securities laws. Forward-looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often address expected future business and financial performance, and often contain words such as "anticipate", "believe", "plan", "estimate", "expect", and "intend", statements that an action or event "may", "might", "could", "should", or "will" be taken or occur, or other similar expressions. All statements, other than statements of historical fact, included herein including, without limitation; statements about the terms and completion of the proposed sale transaction are forward-looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, risks identified in the management discussion and analysis section of the Company's interim and most recent annual financial statement or other reports and filings with Canadian securities regulators. Forward looking statements are made based on management's beliefs, estimates and opinions on the date that statements are made and the respective companies undertakes no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward-looking statements.
SOURCE Cantex Mine Development Corp.
Cantex Mine Development Corp, Tel: +250-860-8582; Email: [email protected]
Share this article