After-tax NPV8 of US$1.5 billionusing base case price forecast
After-tax NPV8 of US$2.2 billionusing incentive price forecast (excluding Chinese supply)
TORONTO, Sept. 5, 2024 /CNW/ - Aclara Resources Inc. ("Aclara" or the "Company") (TSX: ARA) is pleased to announce the results of the Company's updated preliminary economic analysis (the "PEA") on its regolith-hosted ion adsorption clay project located in the State of Goiás, Brazil, known as the Carina Module (the "Project").
Figure 1: Projected life of mine post-tax free cash flow – base case price scenario (CNW Group/Aclara Resources Inc.)
Figure 2: Sensitivity analysis testing the impact on NPV (CNW Group/Aclara Resources Inc.)
Figure 3: Chinese and non-Chinese sourced Antimony, Gallium and Germanium price evolution since January 2023 (CNW Group/Aclara Resources Inc.)
Figure 4: Evolution of basket price vs. commercial discounts throughout the Carina Module life of mine in base case scenario (Chinese) (CNW Group/Aclara Resources Inc.)
Figure 5: Evolution of basket price vs. commercial discounts throughout the Carina Module life of mine in incentive scenario (non-Chinese) (CNW Group/Aclara Resources Inc.)
Table 1: Key Project Operating Parameters Compared to Previous PEA (CNW Group/Aclara Resources Inc.)
The technical report titled "Preliminary Economic Assessment Update - Carina Rare Earth Element Project - Nova Roma, Goiás, Brazil" (the "Report" or "Carina Module PEA") dated September 5, 2024 was prepared in accordance with National Instrument 43-101- Standards of Disclosure for Mineral Projects ("NI 43-101") by GE21 Consultoria Mineral ("GE21"), a specialized, independent mineral consulting company located in Belo Horizonte, Brazil. The Report, with an effective date of May 3, 2024, supports the disclosures made by Aclara in its August 9, 2024 press release announcing the updated maiden mineral resources estimate (the "MRE") for the Project (the "August 2024 Press Release"). There are no material differences in the mineral resources or results of the preliminary economic assessment as described in the Report and the results disclosed in the August 2024 Press Release. The Report has been filed and can be found under the Company's profile on SEDAR+ (www.sedarplus.ca) and on Aclara's website (www.aclara-re.com).
Highlights
Robust economics
After-tax Net Present Value ("NPV") of ~US$1.5 billion using an 8% discount rate pursuant to the base case price forecast projected by Argus Media ("Argus")
27% internal rate of return over the 22-year life of mine and a payback period of 4.2 years
Low initial capital costs of US$593 million and low sustaining capital costs of US$86 million
Average annual1 net revenue and EBITDA of US$505 million and US$366 million, respectively
High average net smelter return ("NSR") of US$52.0 per tonne processed compared to a low average production cost of US$13.6 per tonne processed
Incentive price forecast scenario projected by Argus provides significant upside. This scenario is supported by critical raw material regulations such as the European Critical Raw Materials Act and the United States Inflation Reduction Act, which focus on creating supply chains beyond China
After-tax NPV of ~US$2.2 billion using an 8% discount rate pursuant to the incentive price forecast by Argus (which excludes Chinese supply)
Significant production of magnetic REEs and high product quality
Average annual production1 of 191 tonnes DyTb representing approximately 13% of China's 2023 official production2
_________________________________
1 Annual average does not consider the first year of ramp-up and the last year of ramp-down.
2 The resulting Chinese production of DyTb derived from its 2023 rare earth oxides quotas for mining production is approximately 1,520 tonnes (source: The Chinese Ministry of Industry and Information Technology).
Average annual production1 of 1,350 tonnes NdPr contributing to a balanced mix of light and heavy REEs in the final product
Very high content of DyTb and NdPr in the mixed carbonate of 4.0% and 28.5%, respectively
Concentration of REEs in the mixed carbonate of 91.5%3. High purity product facilitates further separation and recoveries
__________________________________
3 Purity is expressed as REO equivalent.
Expedited path to early production
Memorandum of Understanding signed with the State of Goiás and Nova Roma Municipality in Brazil to accelerate the analysis and evaluation of the permitting process and implementation of the Carina Module
Commissioning estimated to commence in 2029. The Company is evaluating the possibility to expedite the production schedule to begin between 2027 and 2028
Low environmental impact
Process designed to minimize environmental impact: it does not use explosives; there is no crushing nor milling; approximately 95% of the water used is recirculated; the main reagent is a common fertilizer; no liquid residue is produced, negating the need of a tailings dam
Minimal CO2 footprint is supported by a combination of low energy consumption and a high percentage of renewable energy within the Goiás power grid
Upside potential
Exploration potential for lateral expansion to the east of the Carina Module as a result of recently secured mineral rights adjacent to the Company's existing mineral rights
Metallurgical optimization program projected to commence in Q4 2024 will serve as additional inputs for a prefeasibility study of the Carina Module and to form the basis for a new piloting operation scheduled for Q2 2025
Strong financial backing
Key shareholders in Eduardo Hochschild and Hochschild Mining provide financial support to advance the Project
Strategic partnership with CAP S.A. in its Chilean subsidiary derisks project financing for the Penco Module and allows Aclara to focus incremental corporate resources to the Carina Module
Strong bedrock for vertical integration
Adds to the Company's Penco Module production of DyTb for a total DyTb annual average production1 of 241 tonnes, which represents 16% of China's 2023 official DyTb production
Mixed REE carbonate produced expected to be separated and converted into metals and alloys by Aclara Technologies Inc., the Company's US based subsidiary developing REE processing technologies
Strategic partnership signed with VACUUMSCHMELZE GmbH & Co. KG aimed at developing a mine to magnet solution
Aclara's CEO, Ramon Barua, commented:
"The PEA highlights the Carina Module'snotable economic potential, with an after-tax NPV of US$1.5 billionbased on the base case price forecast, and US$2.2 billion whenconsidering the incentive price forecast. These figures underscore the Project's status as a high-quality heavy rare earth asset,designed to deliver significant annualdysprosium and terbiumproduction,representing approximately 13% of China's official output in 2023.
The medium to long-term outlook for rare earth elements, particularly heavy rare earths, remainsstrong due to their global scarcity. Increasing international regulations are enhancing the development of alternative supply chains beyond China, and Argus's incentive price forecast indicatessubstantial upside potential for rare earthsin response to future demand.
Our focus is now on expediting the path to early production. We have recently signed a Memorandum of Understanding with the State of Goiás and Nova Roma Municipality in Brazilas a means to accelerate the permitting process and facilitate the swift implementation of the Carina Module, with the goal of starting production between 2027 and 2028."
Key Project Parameters Compared to Previous PEA
Table 1 and Table 2 list the relevant parameters associated with the Project's operating and financial metrics as compared to the previous preliminary economic assessment filed on January 23, 2024 (the "Previous PEA"):
25% increase in after-tax NPV from US$1.2 billion to US$1.5 billion using an 8% discount rate, despite lower REE price forecast
Slower growth of magnetic REE4 prices following the short-term deacceleration of electric vehicle demand compared to the Previous PEA. In addition, lower expected increase in Nd price, partially offset by higher expected increase in Dy price compared to the Previous PEA. REE price forecast provided by Argus aligns well with global supply/demand fundamentals.
Nd price compound annual growth rate 2023-2034: PEA 7% vs. Previous PEA 10%
Dy price compound annual growth rate 2023-2034: PEA 12% vs. Previous PEA 11%
~30% increase in life of mine from 17 years to 22 years provides support for potential capacity increases in the future
Total capital costs (initial capital costs and sustaining capital costs) maintained at the same level as prior estimates
Table 1: Key Project Operating Parameters Compared to Previous PEA
PEA
Previous PEA
Unit
Total
Annual Average*
Total
Annual Average*
Mining and Processing
Life of Mine
years
22
-
17
-
Total Process Plant Feed
million tonnes (dry)
203.0
9.6
149.5
9.6
Total Waste Mined
million tonnes (dry)
64.2
3.0
43.3
2.6
Strip Ratio
-
0.3
0.3
0.3
0.3
Production
Total Rare Earth Oxides
tonnes
99,931
4,736
70,307
4,498
Neodymium & Praseodymium (NdPr)
tonnes
28,514
1,248
18,546
1,190
Dysprosium (Dy)
tonnes
3,420
163
2,802
178
Terbium (Tb)
tonnes
587
28
479
30
*Note: Annual average does not include the first year of ramp-up and the last year of ramp-down
__________________________________
4 Magnetic REE include Neodymium (Nd), Praseodymium (Pr), Dysprosium (Dy) and Terbium (Tb).
Table 2: Key Project Financial Parameters Compared to Previous PEA
PEA
Previous PEA
Base Case
(Chinese Prices)
Incentive Case
(Non-Chinese Prices)
Base Case
(Chinese Prices)
Unit
Total
Annual Average*
Total
Annual Average*
Total
Annual Average*
Financials
Net Revenue
US$ million
10,554
505
13,091
626
7,355
474
Net Smelter Return
US$/t
52.0
-
64.5
-
49.2
-
Basket Price (2029-2034)
US$/kg
88.8
-
104.6
-
107.4
-
Basket Price (LOM)
US$/kg
122.4
-
142.8
-
121.2
-
Production Cost
US$ million
2,757
129
2,757
129
1,965
125
Unit Cost
US$/t processed
13.6
-
13.6
-
13.1
-
Unit Cost
US$/kg REO
27.6
-
27.6
-
27.9
EBITDA
US$ million
7,586
366
10,072
485
5,243
340
EBITDA Margin
%
72
-
77
-
71
-
Income Tax
US$ million
2,334
118
3,172
154
1,532
101
Effective Tax Rate
%
36.1
-
35.9
-
36.2
-
Initial Capital
US$ million
592.6
-
592.6
-
575.8
-
Royalty Purchase Cost
US$ million
6.5
-
6.5
-
6.5
-
Sustaining Capital
US$ million
85.8
-
85.8
-
106.2
-
Financial Returns
Pre-Tax Net Present Value (8%)
US$ million
2,337
-
3,051
-
1,880
-
Pre-Tax Internal Rate of Return
%
32.2
-
40.5
-
35.7
-
Post-Tax Net Present Value (8%)
US$ million
1,483
-
2,159
-
1,186
-
Post-Tax Internal Rate of Return
%
26.5
-
33.1
-
28.6
-
Payback Period
years
4.2
-
3.4
-
3.6
-
*Note: Annual average does not include the first year of ramp-up and the last year of ramp-down
Sensitivity Analysis
A sensitivity analysis was undertaken to evaluate the impact on NPV through variation of the basket price, discount rate, CAPEX, OPEX and metallurgical recovery rates.
The discount rate was evaluated by varying its value from 4% to 12% while the remaining attributes were evaluated by varying their values from 80% to 120% (Figure 2).
Mineral Resource Statement
The Carina Module's mineral resources have been estimated using the results obtained from 283 auger drill holes (2,101m), 80 reverse circulation holes (2,003m) and 3,789 samples. At a US$7.4/t NSR cut-off, the Carina Module is estimated to contain 297.6 million tonnes ("Mt") in the inferred mineral resource category @ 1,452 ppm TREO containing an average Dy and Tb grade of 39 ppm and 6 ppm, respectively (Table 3). The MRE is reported in accordance with the requirements of NI 43-101.
1. CIM (2014) definitions were followed for mineral resources.
2. Mineral resources are estimated above an NSR value of US$7.4/t.
3. Mineral resources are estimated using average long term metal prices and metallurgical recoveries (see PEA for details).
4. Mineral resources are not mineral reserves and do not have demonstrated economic viability.
Project Description
The Project is based on standard open pit extraction techniques using conventional hydraulic excavators and 44t payload haulage trucks to extract and deliver the clays to the process plant. The process plant has been located close to the centre of mass of the mining operation to minimise the total haulage distance over the life of mine. Given the friable nature of the clays and the shallow depth of the extraction zones, no aggressive nor energy-intensive techniques such as drilling and blasting are required to extract the clays from the pits. Table 4 lists the key input parameters used in the mine design.
Table 4: Key Mine DesignParameters
Description
Unit
Value
Pit Optimization
Overall Slope Angle
degree
25
Reference Mining Cost
US$/t mined
2.13
Mining Recovery
%
98.5
Mining Dilution
%
1.5
Processing Cost
US$/t processed
10.46
Selling Cost
US$/kg REO
7.032
Federal Royalty
% of revenue
3
REO Price
US$/kg REO
variable by REO
Pit design
Bench Height
m
4
Berm Width
m
3.5
Bench Slope Angle
degree
38
Ramp Width
m
12
Ramp Gradient
%
10
Scheduling
Minimum Operational Area
m
25
Plant feed
Mt/year
9.6
Once the clay is delivered to the process plant, it will be washed using an ammonium sulfate solution to extract the REEs from the clay surfaces. No crushing, grinding nor milling is needed to free the REEs from the clays as they are extracted through a non-invasive ion-exchange reaction process whereby ammonium sulfate ions replace REE ions on the surface of the clay thereby liberating the REEs into solution. The REEs in solution are then removed through a pH-adjusted precipitation process and then passed through a high-pressure filter to remove any remaining liquids, resulting in the production of a high-purity REE carbonate ready for shipment to a separation facility. The process plant will have an average production rate of 4,736 t/year of REO within the concentrates.
Any unwanted impurities such as aluminium and calcium that have been extracted from the clays during the ion exchange process are similarly removed through a precipitation process and then recombined with the washed clays before being transported to a dry stacking storage facility for the first five years of the life of mine. Beginning in year 6, the washed clays will be back-filled to the mined-out extraction zones to initiate the mine closure process.
A water recovery system integrated into the process plant cleans and regenerates the remaining process liquors such that they can be reintroduced into the feed. The treated water is reused in a closed circuit to reduce water consumption thereby preventing the release of process water into the environment. This allows the process plant to operate with the minimum of make-up water and allows the main reagents to be regenerated and reused within the process plant.
Before the barren clays exit the process plant, they are washed with clean water within standard plate-and-frame filter presses. This will remove any residual ammonium sulfate from the clays before they are returned to either a dry stacking facility or used to back-fill the extraction zones to be safely used during revegetation.
The Project includes the necessary infrastructure to provide make-up water for the process plant, supply power to the site, and provide a road network to service the operation, amongst others.
Electrical power for the processing plant, truck shop, administration offices, and other facilities will be supplied by the national power utility through overhead power transmission lines from a sub-station located approximately 90 km from the project site.
REE Market Outlook and Pricing5
Vehicle electrification, wind turbines and the transition to renewable energy sources will continue to drive demand for REEs in terms of volume and, especially, value. This will primarily affect the REEs used in alloys to fabricate permanent magnets (i.e., Dy, Nd, Pr, and Tb). The supply of clean heavy REEs, especially Dy, has become problematic because few projects target heavy REE deposits. For the medium term, the market will continue to rely on China and Myanmar for heavy REE feedstocks.
The prices of permanent magnet REEs dropped significantly in 2023 due to a weak recovery from lockdowns in China and economic challenges in other areas. The prices of Nd, Pr, and Tb fell 40–45% from early 2023 and July 2024. However, the Dy price outperformed the market, falling only 20–25% over the same period, indicating a more constrained supply of Dy as compared to other permanent magnet REEs. Argus expects permanent magnet REE prices to increase steadily for the remainder of the decade, with the possibility of increasing at a faster rate in the early 2030s absent additional supply from new projects or increases in the availability of secondary (recycled) REEs. Dy prices are expected to continue to outperform the general permanent magnet REE market due to a tighter supply/demand balance going forward. Between the years 2023 to 2034, Nd, Pr, and Tb prices are predicted to rise at a rate of 5–8% per year, whereas Dy prices are expected to increase 12% per year.
According to Argus, there are two external factors which could have the potential to positively affect future REE prices: so-called 'green' premiums; and critical material policies (particularly within Europe and the US). Critical materials policies and regulations being enacted globally, specifically the European Critical Raw Materials Act and the United States Inflation Reduction Act, are focussed on creating raw material supply chains that are not reliant on China, which could provide advantages to non-Chinese suppliers of REEs in terms of market access and, potentially, pricing premiums. In May 2023, the US Department of Energy identified Dy as the most critical mineral in terms of its importance to the energy sector and the risks of supply chain disruption.
In an effort to account for critical raw material regulations, Argus has modelled an incentive price for magnetic rare earths, where the rare earths market effectively has a dual pricing model (Chinese and non-Chinese) that forecasts the level that REE prices would have to reach to incentivize the supply of REE from producers outside of China. Under the incentive price scenario, the forward curve for Dy grows at 15% per year, compared to 12% per year in the base case scenario (Table 5).
Table 5: Dysprosium Price Forecast
2022
2023
2028
2034
2023 vs
2022 (%)
2028 vs
2023 (%)
2034 vs
2028 (%)
CAGR
2023– 2034 (%)
Dy
Base Case Price* (US$/kg)
384
331
595
1,100
–14
80
85
12
Incentive Price (US$/kg)
384
331
515
1,400
–14
56
170
15
Total supply (×1,000 t REO)
1.7
2.6
3.6
4.4
50
39
23
5
Total demand (×1,000 t REO)
2.8
3.3
5.3
7.0
16
62
32
7
Surplus/deficit index (2018 = 100)
98
96
77
43
–
–
–
–
*99.5–99.9% fob China
The following provides an example of illustrating the potential decoupling of rare earths prices between those sourced from and outside of China, modelled using gallium, germanium and antimony. In September 2024, China will be adding antimony to its export controls for certain metals (in addition to gallium and germanium, which were made subject to its export controls in August 2023). US-delivered prices for antimony have increased approximately 25% as compared to prices for antimony sourced from China, while prices for gallium and germanium sourced on an ex-works China basis have reflected a potential premium of up to 85% in the case of gallium (currently a premium of 45%) and up to 25% in the case of germanium (currently a premium of 10%) (Figure 3). The incentive pricing scenario seeks to emulate a situation where the main economies such as the United States, Europe and Japan are required to supply rare earths outside of China supported by critical materials policies/regulations being enacted in such countries.
_______________________________
5 Argus Media
In consideration of the price forecasts provided by Argus, the basket price of the Carina Project has been modelled through the life of mine, reflecting expected commercial discounts (Figure 4 and Figure 5).
Targeted Development Timeline
The permitting process is currently underway and the technical development of the Project will continue with a feasibility study of the Carina Module scheduled to be delivered in 2026 and commencement of operations projected to begin in 2029 (Table 6). Following the Memorandum of Understanding signed with the Government of Goiás and the Municipality of Nova Roma, the Company is evaluating the possibility to expedite the production schedule to begin between 2027 and 2028.
Proposed Next Steps
Continuation of the Carina Module pre-feasibility study as previously reported in the Company's press release dated May 6, 2024
Completion of a 15,200m Phase 2 reverse circulation drill campaign aimed at converting inferred mineral resources to a measured and indicated mineral resources category, which is expected to be completed by Q4 2024
Completion of the environmental and social baseline studies required for environmental permitting process during H2 2024
Execution of a metallurgical test campaign during H2 2024 and H1 2025 with sample collections to be obtained through sonic drilling and sent to SGS Lakefield for mineralogical and recovery characterization, to serve as additional inputs for the Carina Module prefeasibility study and to form the basis for a new piloting operation
The Company is aiming to complete the installation and operation of a new semi-industrial scale pilot plant in the State of Goias, Brazil during Q2 2025. The piloting operation is intended to (i) confirm the processing parameters and the final process flowsheet design for the feasibility study, (ii) generate a high purity HREE carbonate for separation trials in support of future off-take agreements, and (iii) demonstrate to relevant stakeholders the environmental sustainability of the final process design
Qualified Persons
The technical information in this press release has been reviewed and approved by geologist Fábio Xavier, mining engineer Porfírio Cabaleiro Rodriguez, geographer and environmental analyst Mrs. Branca Horta of GE21 Consultoria Mineral Ltd., as well as Chemical Engineer Stuart J Saich of Promet101 Consulting Pty Ltd. GE21 is a specialized, independent mineral consulting company based in Belo Horizonte, Brazil, and Promet101 is an independent process engineering consulting company based in Santiago, Chile. Mr. Jorge Frutuoso, Aclara Geology Manager, and Mr. Juan Pablo Navarro Ramirez, Chief Geologist for Aclara, acted as the Qualified Person for the geological sections of the report.
Mr. Xavier is a Member of Australian Institute of Geoscientists (MAIG #5179) and is a Qualified Person as defined under NI 43-101. He is responsible for the mineral resource estimate and has reviewed and approved the scientific and technical information related to the mineral resource estimate contained in this press release.
Mr. Rodriguez is a fellow of the Australian Institute of Geoscientists (FAIG #3708) and is a Qualified Person as defined under NI 43-101. He has more than 40 years of experience in mineral resource/reserve estimation and is the leader of the Project acting as overall supervisor with respect to the objectives of the Report.
Mrs. Horta is a Member of the Australian Institute of Geoscientists (MAIG #8145) and is a Qualified Person as defined under NI 43-101. She has reviewed and approved the content of the Report as it relates to environmental and permitting attributes of the Project.
Messrs. Rodriguez and Xavier visited the project from August 16 to August 18, 2023, during the auger drilling campaign executed by the GE21 team under the coordination of Geologist André Costa (FAIG#7967). Mr. Xavier returned to the project from July 17 to July 18, 2024, during the reverse circulation drilling campaign conducted by the Aclara team under the coordination of Geologist Luiz Jorge Frutuoso Junior (FAIG#8100).
Mr. Frutuoso Junior, Aclara's Exploration Manager, supported both visits.Mr. Saich is a professional chemical engineer with more than 37 years' relevant experience in metallurgy and process design development. He is with a member of the Australian Institute of Mining and Metallurgy (FAUSIMM, (#222028), the Canadian Institute of Mining (CIM # 631368), the Society for Mining, Exploration & Metallurgy (SME# 04101270) and is a Qualified Person as defined under NI 43-101.
Mr. Frutuoso is a Fellow of Australian Institute of Geoscientists (FAIG #8100) and Fellow of Australasian Institute of Mining and Metallurgy (FAusIMM #3044851) is a Qualified Person as defined under NI 43-101. He is responsible for the geological sections and has reviewed and approved the scientific and technical information related to the mineral resource estimate contained in this press release.
Mr. Navarro is a Member of Australian Institute of Geoscientists (MAIG #9021) and is a Qualified Person as defined under NI 43-101. He is responsible for the geological sections and has reviewed and approved the scientific and technical information related to the mineral resource estimate contained in this press release.
About Aclara
Aclara Resources Inc. (TSX: ARA) is a development-stage company that focuses on heavy rare earth mineral resources hosted in Ion-Adsorption Clay deposits. The Company's rare earth mineral resource development projects include the Carina Module in the State of Goiás, Brazil as its flagship project and the Penco Module in the Bio-Bio Region of Chile.
Aclara's rare earth extraction process offers several environmentally attractive features. Circular mineral harvesting does not involve blasting, crushing, or milling, and therefore does not generate tailings and eliminates the need for a tailing's storage facility. The extraction process developed by Aclara minimizes water consumption through high levels of water recirculation made possible by the inclusion of a water treatment facility within its patented process design. The ionic clay feedstock is amenable to leaching with a common fertilizer main reagent, ammonium sulfate. In addition to the development of the Penco Module and the Carina Module, the Company will continue to identify and evaluate opportunities to increase future production of heavy rare earths through greenfield exploration programs and the development of additional projects within the Company's current concessions in Brazil, Chile, and Peru.
Aclara has decided to vertically integrate its rare earths concentrate production towards the manufacturing of rare earths alloys. The Company has established a U.S.-based subsidiary, Aclara Technologies Inc., which will focus on developing technologies for rare earth separation, metals, and alloys. Additionally, the Company is advancing its metals and alloys business through a joint venture with CAP S.A., leveraging CAP's extensive expertise in metal refining and special ferro-alloyed steels.
Forward-Looking Statements
This press release contains "forward-looking information" within the meaning of applicable securities legislation, which reflects the Company's current expectations regarding future events, including statements with regard to, among other things, mineral continuity, grade, methodology, development timeline, production timing and upside at the Carina Module, the Company's exploration plan, drilling campaigns and activities in Brazil and the expectations of the Company's management as to the results of such exploration works and drilling activities, timing, cost and scope in respect of the exploration activities in Brazil, the results and interpretations of its updated maiden MRE and the PEA relating to the Carina Module, the timing and issuance of a prefeasibility study and feasibility study for the Carina Module and related exploration and other work programs in respect thereof, the initiation and timing of environmental, archeological and geological studies for the Carina Module, the progression of and pricing forecast of the REE market, and other statements that are not material facts. Forward-looking information is based on a number of assumptions and is subject to a number of risks and uncertainties, many of which are beyond the Company's control. Such risks and uncertainties include, but are not limited to risks related to operating in a foreign jurisdiction, including political and economic risks in Chile and Brazil; risks related to changes to mining laws and regulations and the termination or non-renewal of mining rights by governmental authorities; risks related to failure to comply with the law or obtain necessary permits and licenses or renew them; cost of compliance with applicable environmental regulations; actual production, capital and operating costs may be different than those anticipated; the Company may be not able to successfully complete the development, construction and start-up of mines and new development projects; risks related to fluctuation in commodity prices; risks related to mining operations; and dependence on the Penco Module and/or the Carina Module. Aclara cautions that the foregoing list of factors is not exhaustive. For a detailed discussion of the foregoing factors, among others, please refer to the risk factors discussed under "Risk Factors" in the Company's annual information form dated as of March 22, 2024, filed on the Company's SEDAR+ profile. Actual results and timing could differ materially from those projected herein. Unless otherwise noted or the context otherwise indicates, the forward-looking information contained in this press release is provided as of the date of this press release and the Company does not undertake any obligation to update such forward-looking information, whether as a result of new information, future events or otherwise, except as expressly required under applicable securities laws.
SOURCE Aclara Resources Inc.
For further information, please contact: Ramón Barúa Costa, Chief Executive Officer, [email protected]
Share this article