Anaconda Mining Intersects Multiple Zones Grading up to 3.17 g/t Gold Over 8.5 Meters in Down-Dip Drilling at Pine Cove Mine

TORONTO, June 18, 2014 /CNW/ - Anaconda Mining Inc. ("Anaconda" or "the Company") – (TSX: ANX) is pleased to report additional diamond-drilling results from the down-dip area, Pine Cove mine, Baie Verte Peninsula, Newfoundland. Prior to the commencement of drilling at the Deer Cove Project, Anaconda drilled a single, strategically placed hole on the northern edge of the Pine Cove mine's ultimate pit limit. Hole PC-14-234 returned multiple zones of gold mineralization including 2.46 grams per tonne ("g/t") gold over 8.5 meters ("m") and 3.17 g/t gold over 8.5 m. The following assay results highlight the key zones of mineralization that were intersected in hole PC-14-234.

• 1.54 g/t Au over 6.0 m beginning at a depth of 117.5 m;
• 1.70 g/t Au over 15.5 m beginning at a depth of 173.5 m;
• 2.46 g/t Au over 8.5 m beginning at a depth of 180.5 m; and
• 3.17 g/t Au over 8.5 m beginning at a depth of 212.0 m.

President and CEO, Dustin Angelo, stated, "We are encouraged by the additional drilling we've done on the northern side of the Pine Cove pit and a picture of a potential down-dip gold zone or zones is emerging. We expect to complete additional drilling in the down-dip area after we finish our summer drill campaigns at Deer Cove and Stog'er Tight. The focus will be on further delineating the potential of the down-dip to host economically significant gold mineralization."

Down-Dip Area:

Historic drilling in the down-dip area, principally around hole PC-07-179, had indicated that Pine Cove mineralization continued to the north of the mine. Anaconda has been testing the area immediately north of its Pine Cove mine since completing diamond-drill hole PC-11-181 (Figure 1) in June 2011, which intersected 2.50 g/t Au over 40.8 m. The Company has since drilled nine holes including PC-14-234. This 300 m, vertical hole targeted an area midway between gold mineralization intersected in both PC-11-181 and the historic hole, PC-07-179. Hole PC-14-234 intersected multiple zones of quartz veining/brecciation, iron carbonate, sericite and disseminated pyrite that are analogous to Pine Cove-style mineralization (Figures 2 to 4). Assay highlights from PC-14-234 are presented in Table 1.

Table 1. Assay highlights for PC-14-234

Hole-ID	From (m)	To (m)	Length (m)	Au g/t
PC-14-234	117.5	124.0	6.00	1.54
PC-14-234	173.5	189.0	15.50	1.70
Including	180.5	188.0	8.50	2.46
including	182.0	182.5	0.50	10.40
including	187.0	188.0	1.00	6.44
PC-14-234	212.0	220.5	8.50	3.17
Including	212.0	214.0	2.00	5.29
including	215.5	218.0	2.50	4.82
including	213.0	213.5	0.50	14.80
including	216.0	216.5	0.50	6.31
including	217.5	218.0	0.50	12.70
PC-14-34	234.5	245.0	10.50	1.26
including	242.0	243.0	1.00	3.50
PC-14-234	257.0	261.5	4.50	2.50
including	258.0	259.0	1.00	3.36
including	261.0	261.5	0.50	5.78

Anaconda's drilling has intersected multiple zones of mineralization in the down-dip area. The mineralization appears to flatten northwards and it has been traced approximately 160 m north of the ultimate open pit boundary, to a vertical depth greater than 200 m. It remains open to the north. The mineralization appears to occur within a gently north-plunging synformal fold with the thickest mineralization, as intersected by PC-11-181 and PC-14-234, occupying the core. Additional drilling is warranted to further define the limits of this mineralization and to test potential continuity between zones. A summary of composite diamond-drill assay results from the down-dip area is presented in Table 2.

Table 2. Assay composites for diamond-drill intersections, down-dip area, Pine Cove

Hole-ID	From (m)	To (m)	Length (m)	Au g/t
PC-00-113	102.20	107.50	5.30	1.81
PC-00-113	110.50	144.10	4.00	1.94
PC-00-113	187.00	200.40	3.80	2.01
PC-07-176	82.90	84.90	2.00	11.7
PC-07-176	107.40	109.60	2.20	1.35
PC-07-177	88.60	92.00	3.40	11.59
PC-07-177	101.00	104.00	3.00	1.88
PC-07-178	162.70	164.70	2.00	1.50
PC-07-178	210.60	212.60	2.00	2.40
PC-07-179	102.00	105.90	3.90	1.20
PC-07-179	113.90	115.80	1.90	1.84
PC-07-179	122.00	127.00	5.00	2.58
PC-07-179	181.50	197.60	16.10	2.97
Including	181.50	190.40	9.20	4.05
PC-11-180	85.00	86.00	1.00	3.35
PC-11-180	126.30	129.70	3.40	2.86
PC-11-180	222.00	226.00	4.00	1.14
PC-11-180	284.30	284.80	0.50	12.59
PC-11-181	175.70	176.00	0.30	26.23
PC-11-181	178.00	180.70	2.70	2.19
PC-11-181	206.60	207.20	0.60	15.11
PC-11-181	221.40	262.20	40.80	2.50
including	221.40	232.00	10.60	3.00
Including	221.40	224.00	2.60	8.66
Including	241.20	245.00	3.80	12.79
PC-12-188	192.75	193.75	1.00	3.56
PC-12-188	234.05	238.60	2.90	1.59
PC-12-189	194.05	198.00	3.95	1.12
PC-12-189	214.00	216.00	2.00	1.77
PC-12-189	261.00	265.00	4.00	3.39
Including	263.05	265.00	1.95	6.42
PC-12-189	274.00	275.00	1.00	3.09
PC-13-195	82.92	84.00	1.08	2.70
PC-13-195	168.66	176.58	7.92	4.67
PC-13-198	171.04	177.98	6.94	1.74
PC-13-198	193.86	197.07	3.21	1.26

Table 2 (Continued). Assay composites for diamond-drill intersections, down-dip area, Pine Cove

Hole-ID	From (m)	To (m)	Length (m)	Au g/t
PC-13-199	91.00	92.00	1.00	3.39
PC-13-199	144.15	150.26	6.11	3.48
Including	147.20	150.26	3.06	6.14
PC-13-199	192.03	196.05	4.02	1.20
PC-13-199	237.95	240.00	2.05	1.68
PC-13-200	141.68	144.50	2.82	2.98
PC-14-224	207.37	212.91	5.54	3.06
PC-14-224	243.23	245.20	1.97	2.23

Note: All assay intervals refer to core length and at present true thicknesses of mineralized zones are not known. The diamond drilling was carried out by New Valley Drilling of Springdale, Newfoundland and was supervised by Silvertip Exploration Consultants Inc. The NQ core was logged and sampled at the Pine Cove mine site. Samples selected for analyses were sawn and half the sample was tagged and placed in a sealed plastic bag. Samples generally comprised one meter core intervals. Samples were transported by Silvertip personnel to the Eastern Analytical Laboratory in Springdale, Newfoundland for fire assay. As part of the QA-QC protocol, standards and blanks were randomly inserted during the sampling process. The remaining core is stored at the Pine Cove mine.

This news release has been reviewed and approved by David Evans, P. Geo., with Silvertip Exploration Consultants Inc., a "Qualified Person" under National Instrument 43-101.

ABOUT ANACONDA

Headquartered in Toronto, Canada, Anaconda is a growth oriented, gold mining and exploration company with a producing asset located on the Baie Verte Peninsula in Newfoundland, Canada called the Pine Cove mine.

FORWARD LOOKING STATEMENTS

This document contains or refers to forward-looking information. Such forward-looking information includes, among other things, statements regarding targets, estimates and/or assumptions in respect of future production, mine development costs, unit costs, capital costs, timing of commencement of operations and future economic, market and other conditions, and is based on current expectations that involve a number of business risks and uncertainties. Factors that could cause actual results to differ materially from any forward-looking statement include, but are not limited to: the final approval of the private placement by the Toronto Stock Exchange; the grade and recovery of ore which is mined varying from estimates; capital and operating costs varying significantly from estimates; inflation; changes in exchange rates; fluctuations in commodity prices; delays in the development of the any project caused by unavailability of equipment, labour or supplies, climatic conditions or otherwise; termination or revision of any debt financing; failure to raise additional funds required to finance the completion of a project; and other factors. Additionally, forward-looking statements look into the future and provide an opinion as to the effect of certain events and trends on the business. Forward-looking statements may include words such as "plans," "may," "estimates," "expects," "indicates," "targeting," "potential" and similar expressions. These forward-looking statements, including statements regarding Anaconda's beliefs in the potential mineralization, are based on current expectations and entail various risks and uncertainties. Forward-looking statements are subject to significant risks and uncertainties and other factors that could cause actual results to differ materially from expected results. Readers should not place undue reliance on forward-looking statements. These forward-looking statements are made as of the date hereof and we assume no responsibility to update them or revise them to reflect new events or circumstances, except as required by law.

Company website: www.anacondamining.com

Image with caption: "Figure 1. Diamond-drill plan down-dip area, Pine Cove mine. Also shown are the locations of the drill sections (A, B, C) illustrated in Figures 2 to 4. (CNW Group/Anaconda Mining Inc.)". Image available at: http://photos.newswire.ca/images/download/20140618_C1794_PHOTO_EN_3722.jpg

Image with caption: "Figure 2. Diamond-drill Section A, down-dip area, Pine Cove mine. (CNW Group/Anaconda Mining Inc.)". Image available at: http://photos.newswire.ca/images/download/20140618_C1794_PHOTO_EN_3723.jpg

Image with caption: "Figure 3. Diamond-drill Section B, down-dip area, Pine Cove mine. (CNW Group/Anaconda Mining Inc.)". Image available at: http://photos.newswire.ca/images/download/20140618_C1794_PHOTO_EN_3724.jpg

Image with caption: "Figure 4. Diamond-drill Section C, down-dip area, Pine Cove mine. (CNW Group/Anaconda Mining Inc.)". Image available at: http://photos.newswire.ca/images/download/20140618_C1794_PHOTO_EN_3725.jpg

SOURCE: Anaconda Mining Inc.

Anaconda Mining Inc., Dustin Angelo, President and CEO, [phone], Email: [email protected]; ProConsul Capital Ltd., Andreas Curkovic, Investor Relations, [phone], Email:[email protected]