Electra Drilling Intersects High Grade Cobalt, Extends Mineralization at Idaho Project
TORONTO, May 9, 2022 /CNW/ - Electra Battery Materials Corporation (NASDQ: ELBM) (TSXV: ELBM) ("Electra") is pleased to announce that drilling at its cobalt-copper mineral project in Idaho has successfully extended mineralization by an additional 180 metres to the east of the current deposit as well as down dip from the eastern edge of the resource zone.
- Cobalt is an essential ingredient in long range electric vehicle batteries and the U.S. automotive industry is entirely reliant on foreign supplies of this critical mineral
- Five of six exploration holes drilled in the most recent drill campaign intersected high grade cobalt mineralization, including:
- 2.5 metres at 0.2% cobalt in hole IC21-04
- 1.4 metres at 0.4% cobalt in hole IC21-05
- 2.4 metres at 0.2% cobalt in hole IC21-05A
- Cobalt mineralization remains open along strike in both directions and the final three holes to be reported intersected the mineralized stratigraphy over a depth extent of 400 meters to the east of the current resource
"As expected, drill results on the eastern side of the deposit confirm that the mineralized system has considerable growth potential along strike and at depth" said Dan Pace, Principal Geologist. "Additional drilling to the east of Iron Creek will target zones where the cobalt mineralization may thicken in structural traps. Drilling is also planned for the Ruby zone located 1.5 kilometers to the southeast, where cobalt mineralization can be traced for approximately 300 meters on surface, with 27 surface rock chip samples with assays of up to 0.9%."
"At a time of heightened geopolitical risk, America has commited to securing a domestic supply of critical minerals for the green energy transition," said Trent Mell, CEO. "Idaho is arguably the most prospective location in the world to identify new primary sources of cobalt outside the DRC. Electra's ultra low carbon refinery in Canada will create the first domestic supply of battery grade cobalt for EVs later this year and Idaho can become an important part of a continental EV supply chain strategy that is both in the United States' national interest and good for the environment."
Electra's Iron Creek Project is located in the Idaho Cobalt Belt and is one of the few primary cobalt deposits in the world. The Company completed 30,000 metres of drilling from 2017 to 2019 before pausing exploration to focus on developing its battery materials park in Canada, which will be commissioned in phases starting in Q4 2022.
Iron Creek is considered to be amenable to underground mining extraction, which would result in a small footprint and minimize environmental impact. Drilling has demonstrated multiple mineralized horizons continuous along strike and down-dip. Thicker zones of mineralization of up to 30 metres occur in the eastern portions of the resource that also contain higher grades of cobalt (Figure 1).
Iron Creek currently has an NI 43-101 compliant Mineral Resource Estimate, outlining an Indicated Resource of 2.2 million tonnes at 0.32% cobalt equivalent (0.26% cobalt and 0.61% copper) for 12.3 million pounds of contained cobalt and Inferred Resource of 2.7 million tonnes at 0.28% cobalt equivalent (0.22% cobalt and 0.68% copper) for an additional 12.7 million pounds of contained cobalt. There is potential to extend mineralization in all directions with ongoing drilling. A copy of the technical report is available on the Company's website at electrabmc.com/our-business/iron-creek.
In 2021, exploration successfully extended the known mineralization along strike to the east and west as well as at depth (Figure 2). Mineralization remains open in both directions and additional infill drilling could target structural traps within the mineralized stratigraphy where thicker zones of cobalt mineralization may be present. Electra will explore these targets, as well as other mineralized areas within its large and highly prospective land position.
In 2022, Electra plans to advance the Iron Creek project with additional exploration drilling. Phase 1 will target the eastern extensions to the resource area between the resource boundary and these latest intercepts. Drillholes will explore for thicker zones of high grade cobalt mineralization similar to previous drill intercepts from underground adit #1, which included 25.7 metres of 0.35% Co in hole ICS18-03 (see October 24, 2018 press release).
The second phase of drilling will target the Ruby Zone located 1.5 km southeast of the known resource area at Iron Creek. Cobalt and copper mineralization is exposed over a 315-metre strike length, making Ruby a very prospective target. Previous chip channel sampling returned multiple mineralized intervals, including 10.7m of 0.24% Co (including 1.5m of 0.48% Co) and 7.6m of 0.26% Co in a similar setting to Iron Creek (see October 30, 2019 press release). Drilling will target the down dip extension of the surface mineralization from three drill platforms.
The Iron Creek Project is located within Electra's Idaho property, which consists of mining patents and exploration claims over an area of 2,300 hectares covering the strike extent of strata hosting mineralization. Historic underground development at Iron Creek includes 600 metres of drifting from three adits. An all-weather road connects the property to a state highway and nearby towns, Challis and Salmon.
Iron Creek is one of several cobalt-copper resources and prospects within the Idaho Cobalt Belt, a prospective mineralized system that contains the largest primary resources of cobalt in the United States, according to the U.S. Geological Survey. Mineralization-style throughout the Belt is considered to be stratabound meta-sedimentary rock hosted. Within Electra's own property boundaries, numerous satellite targets have been identified.
Table 1. Assay Results
Hole ID |
From |
To |
Drilled Length |
True Width |
Cobalt % |
Copper % |
CoEq % |
IC21-04 |
79.4 |
82.7 |
3.3 |
2.48 |
0.18 |
0.21 |
0.21 |
IC21-05 |
417.9 |
419.4 |
1.5 |
0.64 |
0.31 |
- |
0.31 |
IC21-05 |
440.1 |
442.3 |
2.2 |
0.92 |
0.21 |
- |
0.21 |
IC21-05 |
450.6 |
453.8 |
3.2 |
1.37 |
0.40 |
- |
0.40 |
IC21-05A |
388.8 |
393.8 |
5.0 |
2.41 |
0.20 |
- |
0.20 |
IC21-05A |
417.5 |
419.8 |
2.3 |
1.14 |
0.25 |
- |
0.25 |
True width estimated from the surveyed drillholes intercept angle with the azimuth and inclination of |
Blanks, duplicates, and standards were inserted into the sample chain at the core processing site as part of the QA/QC program. All samples were submitted to ALS laboratories in Twin Falls, Idaho by Company staff. Drill core samples are dried, weighed, crushed to 70% passing -2mm, split to 250g pulps crushed to 85% passing minus 75 microns. Samples were dissolved with a sodium peroxide fusion with gravimetric dilution in glassless labware and analyzed using super trace methods via ICP-MS and ICP-AES. Samples over 2% Copper were analyzed with a HF-HNO3-HClO4 digest and analyzed with ICP-AES.
Dan Pace is a Registered Member of the Society for Mining, Metallurgy & Exploration and is the Qualified Person as defined by National Instrument 43-101 who has reviewed and approved the contents of this news release. Mr. Pace is employed as Principal Geologist for Electra Battery Materials Corporation.
Electra's core strategy is to produce low carbon, ethically sourced battery materials for the North American electric vehicle supply chain. The Company is specifically focused on creating the first integrated battery materials park in North America, providing refined cobalt, nickel and recycled battery materials to North American battery precursor manufacturers. Electra also owns the advanced exploration-stage Iron Creek cobalt-copper project in Idaho, USA.
On behalf of Electra Battery Materials
Trent Mell
Chief Executive Officer
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Readers are cautioned that mineral resources are not economic mineral reserves and that the economic viability of resources that are not mineral reserves has not been demonstrated. The estimate of mineral resources may be materially affected by geology, environmental, permitting, legal, title, socio-political, marketing or other relevant issues. The mineral resource estimate is classified in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum's "2014 CIM Definition Standards on Mineral Resources and Mineral Reserves" incorporated by reference into NI 43-101. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies or economic studies except for Preliminary Economic Assessment as defined under NI 43-101. Readers are cautioned not to assume that further work on the stated resources will lead to mineral reserves that can be mined economically. An Inferred Mineral Resource as defined by the CIM Standing Committee is "that part of a Mineral Resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity. An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration."
This news release may contain forward-looking statements and forward-looking information (together, "forward-looking statements") within the meaning of applicable securities laws and the United States Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical facts, are forward-looking statements. Generally, forward-looking statements can be identified by the use of terminology such as "plans", "expects', "estimates", "intends", "anticipates", "believes" or variations of such words, or statements that certain actions, events or results "may", "could", "would", "might", "occur" or "be achieved". Forward-looking statements involve risks, uncertainties and other factors that could cause actual results, performance, and opportunities to differ materially from those implied by such forward-looking statements. Factors that could cause actual results to differ materially from these forward-looking statements are set forth in the management discussion and analysis and other disclosures of risk factors for Electra Battery Materials Corporation, filed on SEDAR at www.sedar.com. Although Electra Battery Materials Corporation believes that the information and assumptions used in preparing the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which only apply as of the date of this news release, and no assurance can be given that such events will occur in the disclosed times frames or at all. Except where required by applicable law, Electra Battery Materials Corporation disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.
SOURCE Electra Battery Materials Corporation
Visit www.ElectraBMC.com or contact: Investor Relations, Sabrina Gunness, [email protected], +1.416.900.3891
Share this article