Highlights include 22.56 g/t Au across 7.0 metres
THUNDER BAY,ON, Aug. 30, 2017 /CNW/ - Premier Gold Mines Limited (TSX-PG) is pleased to provide an update on the 2017 drilling program at the Company's 100%-owned Hasaga Project in the Red Lake gold mining district of Northwestern Ontario. The program is targeting potential higher grade mineralization along the Hasaga Porphyry trend at depth, proximal to historic results and includes wedged holes from historic drill sites.
Selected Drill Hole Highlights include:
A comprehensive table of assay highlights from the 2017 Hasaga Deep drill program is summarized in Table 1.
All abbreviations used in this press release are available by following this link (click here).
The Hasaga Porphyry (See Figure 1) is host to the past-producing Hasaga, Buffalo and Howie Mines and is being evaluated for both lower grade, open-pit potential, as well as higher grade mineralization that may occur at depth. Premier considers Hasaga to have similar exploration potential to other historic mining camps in Ontario, where gold resources have been discovered at the site of past-producing mines. In January, Premier confirmed the multi-million ounce potential of the shallower target areas.
The 2017 program is primarily focused on testing the potential for deeper higher grade mineralization in the Hasaga porphyry. Historic drill holes with positive results, HRL-88-02, HRL-88-03 and HRL96-02 completed by earlier operators were never adequately followed up. These historic results and the Premier high grade intercept in hole HMP151 (see press release dated March 1, 2017) may represent mineralization characteristic of the C-Zone at the Hasaga Mine that occurs down-plunge of the historic mined area. If the current program can confirm lateral continuity and scale to the C-Zone discovery, it may have the potential to become a bulk mineable underground opportunity that would complement the open pit resource delineated in the 2015-16 drill programs.
"The positive results of our 2017 program adds to the success of our 2016 campaign, which confirmed a multi-million ounce resource of near surface mineralization." commented Stephen McGibbon, Premier's Executive Vice-President on the Company's C-Suite Blog (http://www.premiergoldmines.com/news/c-suite-blog). "We continue to extend mineralization at depth at C-Zone and towards the Buffalo Zone (the "West Extension") in addition to confirming the continuity of mineralization proximal to historic intercepts on the property."
Based on these positive preliminary results from the two primary target areas Premier plans to continue drilling during the remainder of the year. One drill is currently active on the Hasaga Property.
C-Zone Target Areas
The 2017 drilling on the C-Zone target has included the reaming of historic holes in order to wedge other holes that may extend the size of the C-Zone and better understand the distribution of mineralization. The completion of two wedged holes from hole 17-88-02 confirmed the historical mineralization and extended high grade that was intercepted in the previously released hole HMP151 with 54 m of 10.90 g/t Au, located 100 metres east along strike and 150 metres down dip. These results are highlighted in Figure 2.
West Extension Target
The West Extension Target area is a 1.6 kilometre southwest extension between the C-Zone target and the Buffalo Zone to the west. Holes HMP161 and HMP162 were 500 metre south west step-outs along strike from the C-Zone, within the anticipated mineralized Hasaga Deep horizon. Hole HMP161 intersected a broad 291 metre envelope of low grade (0.95 g/t Au) mineralization, which included 19 metres of 2.14 g/t Au and 18 metres of 2.21 g/t Au. Alteration is characterized by sericitization and silicification of the host porphyry. Gold mineralization occurs in association with minor sulphide-bearing sequences and also as visible gold within common quartz veinlet arrays.
Reaming Historic Holes
The reaming of the historic holes has been proved to be important in confirming the location of the mineralization with new assay information and in fixing the position and trace of the upper portion of the original drill hole by using more modern borehole survey techniques.
| Table 1: Updated 2017 assays for Hasaga Deep Drilling |
|||||||||
| Hole ID |
Coordinates(1) |
Azimuth/Dip |
Elevation |
Section |
Comment/ |
From |
To |
Intercept (2) |
Au (g/t) |
| *HMP151 |
442172.1/5651660.0 |
323.7 / -80.5 |
387.5 |
12100 |
VG |
771.0 |
825.0 |
54.0 |
10.9 |
| including |
771.0 |
779.0 |
8.0 |
23.3 |
|||||
| and |
789.0 |
812.0 |
23.0 |
11.2 |
|||||
| and |
820.0 |
825.0 |
5.0 |
25.6 |
|||||
| HMP153 |
441145.6/5651862.0 |
147.7 / -81.0 |
385.7 |
11200 |
1064.0 |
1065.0 |
1.0 |
41.20 |
|
| HMP156 |
441809.3/5651312.0 |
322.5 /-80 |
380.0 |
11650 |
VG |
1047.0 |
1050.0 |
3.0 |
6.68 |
| HMP157 |
441154.4/5651748 |
150.1 / -78 |
380.0 |
11200 |
758.0 |
759.0 |
1.0 |
19.90 |
|
| HMP159 |
441322.1/5651839.0 |
147.5 / -80 |
380.4 |
11400 |
7.5 |
9.0 |
1.5 |
4.67 |
|
| VG |
826.0 |
828.0 |
2.0 |
4.88 |
|||||
| 921.0 |
923.0 |
2.0 |
5.00 |
||||||
| HMP160 |
441718.3/5651253.0 |
330 / -80 |
380.0 |
11500 |
1291.0 |
1293.0 |
2.0 |
3.28 |
|
| VG |
1319.0 |
1322.0 |
3.0 |
3.72 |
|||||
| HMP161 |
440664.5/5651647.0 |
151.5 /-80 |
385.6 |
10750 |
1031.0 |
1212.0 |
181.0 |
1.21 |
|
| including |
1033.0 |
1052.0 |
19.0 |
2.14 |
|||||
| and |
1077.0 |
1095.0 |
18.0 |
2.21 |
|||||
| and |
1105.0 |
1110.0 |
5.0 |
2.88 |
|||||
| And; VG |
1211.0 |
1212.0 |
1.0 |
19.4 |
|||||
| HMP162 |
440664.5/5651646.8 |
151.5/-62 |
386 |
VG |
799.0 |
807.0 |
8.0 |
9.55 |
|
| including |
799.0 |
800.0 |
1.0 |
64.60 |
|||||
| 17-88-02w1 |
441546/5651183 |
330/-80 |
385 |
VG |
977.0 |
987.0 |
10.0 |
3.38 |
|
| including |
985.0 |
987.0 |
2.0 |
13.30 |
|||||
| VG |
1083.0 |
1088.0 |
5.0 |
3.55 |
|||||
| 17-88-02w2 |
441546/5651183 |
330/-80 |
385 |
VG |
881.0 |
886.0 |
5.0 |
3.36 |
|
| VG |
898.0 |
905.0 |
7.0 |
22.56 |
|||||
| including |
904.0 |
905.0 |
1.0 |
125.00 |
|||||
| 1) UTM NAD83, Zone 15 2) True widths are estimated to be 50 to 70% of core length * Denotes previously released assays |
|||||||||
Stephen McGibbon, P. Geo., is the Qualified Person for the information contained in this press release and is a Qualified Person within the meaning of National Instrument 43-101. Assay results are from core samples sent to either Accurassay Laboratories or Activation Labs, both accredited mineral analysis laboratories in Thunder Bay, Ontario, for preparation and analysis utilizing both fire assay and screen metallic methods.
Premier Gold Mines Limited is a gold producer and respected exploration and development company with a high-quality pipeline of precious metal projects in proven, accessible and safe mining jurisdictions in Canada, the United States, and Mexico.
This Press Release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward-looking information includes, but is not limited to, statements about the completion of the Financing, strategic plans, including future operations, future work programs, capital expenditures, discovery and production of minerals, price of gold and currency exchange rates, timing of geological reports and corporate and technical objectives.. Forward-looking information is necessarily based upon a number of assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information, including the risks inherent to the mining industry, adverse economic and market developments and the risks identified in Premier's annual information form under the heading "Risk Factors". There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Premier disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.
SOURCE Premier Gold Mines Limited
Ewan Downie, President & CEO, Phone: 807-346-1390, Fax: 807-346-1381, e-mail: [email protected], Web Site: www.premiergoldmines.com
Share this article