Talisker Restarts drilling at Bralorne and Continues to Intercept New High-Grade Veins

TORONTO, Jan. 13, 2022 /CNW/ - Talisker Resources Ltd. ("Talisker" or the "Company") (TSX: TSK) (OTCQX: TSKFF) is pleased to announce the restart of drilling at its 100% owned flagship Bralorne Gold Project.  In addition, the Company has received high-grade results from drill hole SB-2021-077A highlighted by 22.99 g/t Au over 2.0 metres within 2.89 g/t Au over 18.40 metres.

Key Points:

Figure 2: SB-2021-077A cross section with vein intersections and grade. (CNW Group/Talisker Resources Ltd)

Figure 1: SB-2021-077A hole location within the Bralorne West Block. (CNW Group/Talisker Resources Ltd)

• The Company has initiated drilling with a total of six drill rigs with a seventh starting later in the month.
• Hole SB-2021-077A intersected high-grade mineralization within a newly defined vein highlighted by  22.99 g/t Au over 2.0 metres within a broader zone of  2.89 g/t Au over 18.40 metres.
• Another new vein was intersected between 664.5 and 665 metres grading 9.08 g/t Au.
• The 55FW vein was intersected between 900.28 and 901.3 metres grading 6.47 g/t Au.
• SB-2021-077A is the 10^th intersection on the 55FW vein.
• The 53 vein was intersected at a depth of 1,007.7 metres and graded 35.40 g/t over 0.5 metres within 3.14 g/t Au over 6.20 metres.
• SB-2021-077A is the 34^th intersection on the 53 vein highlighted by previously released results of 6.83 g/t Au over 1.5 metres (hole SB-2020-008), 16.42 g/t Au over 1.10 metres (hole SB-2021-012) and 8.67 g/t Au over 1.25 metres within 2.04 g/t Au over 15.10 metres (hole SB-2021-049).
• The Company continues to advance rapidly to its maiden resource for the Bralorne Gold Project expected during Q2 2022.

Terry Harbort, President and CEO of Talisker commented, "We are very pleased to be starting drilling again at Bralorne following what was a challenging 2021 for our communities, staff and the junior exploration industry as a whole. Talisker advanced strongly last year with our drill program and we invisage a further 20,000m to reach our planned resource target."

A total of 83,847 metres consisting of 164 holes of a planned and fully funded 100,000 metres was drilled at the Bralorne Gold Project in 2021 with a total of 104,162 metres (197 holes) completed since Talisker initiated drilling in February 2020.  A total of 28,833 samples are currently at the assay laboratory and are expected to be received by the Company shortly.

SB-2021-077A Hole Description

• Complete results have been received for this hole.
• Located in the Bralorne West block and centrally located within the Bralorne Diorite intrusive.
• Broad zones of mineralization related to a new vein intersected from 222.10 to 240.00m.
• 55 Footwall vein intersected from 900.28 to 901.82m.
• 53 vein intersected from 1,007.70 to 1,009.00m with visible gold.
• Major vein structures intersected are considered classic Bralorne crack-seal quartz-carbonate veins with densely banded sulphide septae hosting fine-grained arsenopyrite and pyrite mineralization with strong silica-sericite alteration halos.
• Zones of broader mineralization are hosted in both the granitic intrusive and diorite as zones of increased veinlet density associated with intense silica-sericite alteration and disseminated pyrite-arsenopyrite mineralization.

Table 1: Bralorne Gold Project - Drill Hole SB-2021-077A
Diamond Drill Hole Name	From (m)	To (m)	Interval (m)	Au (g/t)	Zone	Method Reported
SB-2021-077A	221.6	222.1	0.5	0.38	Vein Halo4	Au-AA26
SB-2021-077A	222.1	222.6	0.5	3.69		Au-SCR24
SB-2021-077A	222.6	224	1.4	0.01		Au-AA26
SB-2021-077A	224	225	1	0.18		Au-AA26
SB-2021-077A	225	226	1	0.40		Au-AA26
SB-2021-077A	226	226.5	0.5	0.17		Au-AA26
SB-2021-077A	226.5	227	0.5	0.46		Au-AA26
SB-2021-077A	227	227.5	0.5	0.02		Au-AA26
SB-2021-077A	227.5	228	0.5	0.12		Au-AA26
SB-2021-077A	228	228.5	0.5	0.98		Au-AA26
SB-2021-077A	228.5	229	0.5	0.82		Au-AA26
SB-2021-077A	229	229.5	0.5	0.10		Au-AA26
SB-2021-077A	229.5	230	0.5	0.02		Au-AA26
SB-2021-077A	230	230.5	0.5	0.15		Au-AA26
SB-2021-077A	230.5	231.3	0.8	1.65	New Vein	Au-SCR24
SB-2021-077A	231.3	232	0.7	25.10		Au-SCR24
SB-2021-077A	232	232.5	0.5	24.80		Au-SCR24
SB-2021-077A	232.5	233.3	0.8	20.00		Au-SCR24
SB-2021-077A	233.3	233.8	0.5	1.89		Au-SCR24
SB-2021-077A	233.8	234.3	0.5	0.62	Vein Halo	Au-AA26
SB-2021-077A	234.3	234.9	0.6	0.32		Au-AA26
SB-2021-077A	234.9	236	1.1	0.11		Au-AA26
SB-2021-077A	236	237	1	0.03		Au-AA26
SB-2021-077A	237	238	1	0.06		Au-AA26
SB-2021-077A	238	239	1	0.02		Au-AA26
SB-2021-077A	239	240	1	0.22		Au-AA26
SB-2021-077A	662.5	664	1.5	0.24	New Vein	Au-AA26
SB-2021-077A	664	664.5	0.5	3.87		Au-SCR24
SB-2021-077A	664.5	665	0.5	9.08		Au-SCR24
SB-2021-077A	665	666	1	0.29		Au-AA26
SB-2021-077A	666	667	1	0.18		Au-AA26
SB-2021-077A	900.28	901.3	1.02	6.47	55FW Vein	Au-SCR24
SB-2021-077A	901.3	901.82	0.52	1.24		Au-SCR24
SB-2021-077A	1005.7	1006.2	0.5	0.71	53 Vein	Au-AA26
SB-2021-077A	1006.2	1006.7	0.5	0.14		Au-AA26
SB-2021-077A	1006.7	1007.2	0.5	0.04		Au-AA26
SB-2021-077A	1007.2	1007.7	0.5	0.01		Au-AA26
SB-2021-077A	1007.7	1008.2	0.5	35.40		Au-AA26
SB-2021-077A	1008.2	1009	0.8	0.01		Au-AA26
SB-2021-077A	1009	1010.5	1.5	0.01		Au-AA26
SB-2021-077A	1010.5	1011.9	1.4	0.93		Au-AA26
Notes:  Diamond drill hole SB-2021-077A has collar orientation of Azimuth 180; Dip -53.5.  True widths are estimated at 40 - 90% of intercept lengths and are based on oriented core measurements where available. Method Reported includes the most up to date information as of the date of this press release.

Qualified Person

The technical information contained in this news release relating to the drill results at the Bralorne Gold Project has been approved by Leonardo de Souza (BSc, AusIMM (CP) Membership 224827), Talisker's Vice President, Exploration and Resource Development, who is a "qualified person" within the meaning of National Instrument 43-101, Standards of Disclosure for Mineral Projects.

About Talisker Resources Ltd.

Talisker (taliskerresources.com) is a junior resource company involved in the exploration of gold projects in British Columbia, Canada. Talisker's projects include two advanced-stage projects, the Bralorne Gold Complex and the Ladner Gold Project, both advanced-stage projects with significant exploration potential from historical high-grade producing gold mines, as well as its Spences Bridge Project where the Company holds ~85% of the emerging Spences Bridge Gold Belt and several other early-stage Greenfields projects. With its properties comprising 296,983 hectares over 346 claims, three leases and 198 crown grant claims, Talisker is a dominant exploration player in south-central British Columbia. The Company is well funded to advance its aggressive systematic exploration program at its projects. 

Sample Preparation and QAQC

Drill core at the Bralorne project is drilled in HQ to NQ size ranges (63.5mm and 47.6mm respectively). Drill core samples are minimum 50 cm and maximum 160 cm long along the core axis. Samples are focused on an interval of interest such as a vein or zone of mineralization. Shoulder samples bracket the interval of interest such that a total sampled core length of not less than 3m both above and below the interval of interest must be assigned. Sample QAQC measures of unmarked certified reference materials (CRMs), blanks, and duplicates are inserted into the sample sequence and make up 9% of the samples submitted to the lab for holes reported in this release. Sample preparation and analyses is carried out by ALS Global in North Vancouver, British Columbia, Canada and SGS Canada in Burnaby, British Columbia, Canada. Drill core sample preparation includes drying in an oven at a maximum temperature of 60°C, fine crushing of the sample to at least 70% passing less than 2 mm, sample splitting using a riffle splitter, and pulverizing a 250 g split to at least 85% passing 75 microns (ALS code PREP-31 / SGS code PRP89). Gold in diamond drill core is analysed by fire assay and atomic absorption spectroscopy (AAS) of a 50g sample (ALS code Au-AA26 / SGS code GO_FAA50V10), while multi-element chemistry is analysed by 4- Acid digestion of a 0.25 g sample split with detection by inductively coupled plasma mass spectrometer (ICP-MS) for 48 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr). Gold assay technique (ALS code Au-AA26 / SGS code FAA50V10) has an upper detection limit of 100 ppm. Any sample that produces an over-limit gold value via the gold assay technique is sent for gravimetric finish (ALS method Au-GRA22 / SGS method GO_FAG50V) which has an upper detection limit of 1,000 ppm Au. Samples where visible gold was observed are sent directly to screen metallics analysis and all samples that fire assay above 1 ppm Au are re-analysed with method (ALS code Au-SCR24 / SGS code - 6 - GO_FAS50M) which employs a 1kg pulp screened to 100 microns with assay of the entire oversize fraction and duplicate 50g assays on the undersize fraction. Where possible all samples initially sent to screen metallics processing will also be re-run through the fire assay with gravimetric finish provided there is enough material left for further processing.

Caution Regarding Forward-Looking Information

Certain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words "could", "intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on Talisker's current belief or assumptions as to the outcome and timing of such future events. Actual future results may differ materially. Those assumptions and factors are based on information currently available to Talisker. Although such statements are based on reasonable assumptions of Talisker's management, there can be no assurance that any conclusions or forecasts will prove to be accurate.

While Talisker considers these statements to be reasonable based on information currently available, they may prove to be incorrect. Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include market risks and the demand for securities of the Company, risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions and the COVID-19 pandemic, access and supply risks, reliance on key personnel, operational risks, and regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks.

The forward-looking information contained in this news release is made as of the date hereof, and Talisker is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.

SOURCE Talisker Resources Ltd

Terry Harbort, President and CEO, [email protected], [phone]