Volta Resources confirms the extension of the high-grade Kiaka South gold mineralization at its Kiaka Gold Project, Burkina Faso

News provided by

Volta Resources Inc.

Aug 29, 2012, 10:29 ET

- 22.15m @ 3.51g/t gold, including 5.0m @ 13.38g/t Gold, -
- also 12.0m @ 2.43g/t gold, including 4.0m @ 6.91g/t Gold -

TORONTO, Aug. 29, 2012 /CNW/ - Volta Resources Inc. ("Volta Resources" or the "Company") (TSX: VTR) announces additional results from its follow-up drilling program at the Kiaka South Area, on its Kiaka Gold property. These comprise the results from 174 drill holes, totaling 20,671 of drilling, representing respectively 23 core holes (4,371m) and 151 reverse circulation holes (16,300m). The results confirm the extension of high-grade gold mineralization at depth and along strike.

The high-grade mineralization at the Kiaka South Area is situated approximately 700m southwest of the Company's Kiaka Central Area where a positive pre-feasibility study has already defined proven and probable mineral reserves of 126.08 million tonnes at a diluted grade of 0.96 g/t Au for 3.89 million ounces of gold within a single open pit (see News Release of 3 May 2012), within NI-43-101 compliant resources including 117.42 million tonnes @ 1.07 g/t Au for 4,029,000 ounces in the Measured and Indicated categories and 29.96 million tonnes @ 1.00 g/t Au for 1,000,000 ounces in the Inferred category (Please see VTR press release dated March 21, 2012).

The Kiaka South Area gold mineralization occurs from surface and is characterized by high-grade intercepts with single meter intervals regularly exceeding 10g/t gold. Most drill holes intersecting the orebody have, so far, returned high grade gold values over narrow to moderate widths confirming the continuity of the high-grade mineralization. The mineralization is contained within a broad north trending corridor, with three more discrete high grade plunging lenses trending northeast obliquely across this corridor (see Figure1). To date the mineralized corridor has been drilled over a length of more than 600m, between sections 3625N and 4150N, and to a vertical depth exceeding 150m. Highlights from the current reported holes include:

KDH414 :   15.00m @ 2.14g/t Au, including 9.4m @ 2.77g/t Au
KDH415 :  13.10m @ 1.87g/t Au, including 5.0m @ 3.85g/t Au
KDH416 :   4.45m @ 7.70 g/t Au AND 8.3m @ 2.52g/t Au
KDH417 :  22.00m @ 2.20g/t Au, including 3.4m @ 5.44g/t Au
KDH433 :  22.15m @ 3.51g/t Au, including 5.0m @ 13.38g/t Au
KDH437 :  13.00m @ 1.37g/tAu, including 5.0m @ 2.57g/t Au
KDH439 :  17.00m @ 2.46g/t Au AND 8.0m @ 5.57g/t Au
KKRC348 :  19.00m @ 1.17g/t Au, including 3.0m @ 4.92g/t Au
KKRC349 :   8.00m @ 6.71 g/t Au, including 2.0m @ 23.15g/t Au
KKRC576 :  12.00m @ 2.43g/t Au, including 4.0m @ 6.91g/t Au
KKRC654 :   2.00m @ 11.86g/t Au
KKRC656 :  10.00m @ 6.46g/t Au, including 4.0m @15.63g/t Au
  AND 5.0m @ 5.48g/t Au, including 2.0m @ 13.23g/t Au
KKRC668 :   6.00m @ 5.07g/t Au
KKRC682 :  11.00m @ 3.12g/t Au, , including 6.0m @ 5.35g/t Au

Kevin Bullock, Volta Resources' CEO, said, "The Kiaka South Area is a good complement to our established Kiaka Central deposit.  By combining Kiaka South's higher grade concentrated mineralization with the Central Area's broader diffused mineralization in the first year of production we have the potential to boost the project's economic returns.  We are currently preparing a NI 43-101 compliant resource estimate for the Kiaka South Area."

Results for the holes are highlighted in Table 1 and locations shown in Figure 1. Analyses of the Volta Resources samples were undertaken by fire assay on a 50g charge at ALS Chemex Laboratories and/or at Actlabs Laboratory, both in Ouagadougou. Volta Resources's sampling and assay procedures included rigorous QA/QC elements that employed the inclusion of certified standards and blanks.

Table 1: Highlights of gold intersections for the reported boreholes

HOLE ID FROM (m) TO
(m) 		INTERVAL
(m) 		Au (g/t) REMARKS
KDH413 207.00 222.00 15.00 0.87  
INCL 214.00 219.00 5.00 1.27  
KDH414 87.00 102.00 15.00 2.14 97.0-98.0m = 14.6g/t Au
INCL 87.00 90.00 3.00 1.85  
INCL 92.60 102.00 9.40 2.77  
AND 148.70 150.00 1.30 9.50 148.7-149.35m = 18.40g/t Au
KDH415 230.00 243.10 13.10 1.87  
INCL 236.00 241.00 5.00 3.85  
KDH416 75.00 79.45 4.45 7.70 77.45-78.45m = 29.5g/t Au
AND 123.00 128.20 5.20 2.56  
AND 165.00 173.30 8.30 2.52  
INCL 171.60 173.30 1.70 8.99  
KDH417 195.00 217.00 22.00 2.20 196.0-197.0m = 13.8g/t Au; 200.6-201.4m = 17.9g/t Au
INCL 200.60 204.00 3.40 5.44  
INCL 208.00 213.00 5.00 2.42  
AND 222.00 223.15 1.15 5.50  
KDH418 140.00 152.00 12.00 1.46  
INCL 143.00 152.00 9.00 1.85  
KDH420 54.35 58.30 3.95 1.80  
KDH421 4.50 8.50 4.00 1.22  
AND 123.50 127.00 3.50 2.59  
AND 133.85 152.25 18.40 0.56  
KDH427 20.00 38.00 18.00 1.16  
KDH433 35.00 57.15 22.15 3.51 40.0-41.0m = 28.9g/t Au; 41.0-42.0m = 32.2g/t Au
INCL 40.00 45.00 5.00 13.38  
KDH437 59.00 60.00 1.00 14.65  
AND 116.00 120.00 4.00 1.44  
AND 169.00 182.00 13.00 1.37  
INCL 170.00 175.00 5.00 2.57  
AND 137.10 139.30 2.20 39.05 137.1-138.2m = 77.5g/t Au
KDH439 37.15 40.00 2.85 4.88 37.15-38.2m = 9.79g/t Au
AND 70.00 87.00 17.00 2.46  
AND 132.00 143.60 11.60 0.89  
INCL 132.00 140.10 8.10 1.05  
AND 148.00 156.00 8.00 5.57 150.0-151.0m = 42.4g/t Au
KDH440 1.85 5.50 3.65 1.50  
AND 45.00 62.70 17.70 0.71  
AND 155.00 168.00 13.00 1.26  
INCL 157.00 162.00 5.00 3.03  
KDH441 68.00 90.20 22.20 1.19 68.0-69.0m = 17.2g/t Au
INCL 68.00 69.75 1.75 10.69  
AND 119.00 120.00 1.00 15.95  
KDH442 59.00 66.40 7.40 1.95 63.0-64.0m = 10.3g/t Au
INCL 63.00 65.70 2.70 4.73  
KDH443 64.00 70.00 6.00 1.24  
INCL 66.00 70.00 4.00 1.73  
KDH444 56.00 58.85 2.85 1.59  
KKRC342 4.00 10.00 6.00 1.58 Loss of Core 8.0-9.0m
INCL 4.00 8.00 4.00 1.88  
KKRC345 9.00 12.00 3.00 2.46  
KKRC348 24.00 43.00 19.00 1.17  
INCL 32.00 35.00 3.00 4.92  
KKRC349 15.00 19.00 4.00 1.48  
AND 29.00 37.00 8.00 6.71 29.0-30.0m = 44.1g/t Au
INCL 29.00 31.00 2.00 23.15  
KKRC351 40.00 41.00 1.00 6.45  
KKRC497 96.00 100.00 4.00 1.63 ended in mineralization
KKRC508 1.00 9.00 8.00 1.16  
INCL 1.00 4.00 3.00 2.40  
KKRC509 55.00 58.00 3.00 1.40  
AND 64.00 92.00 28.00 0.85 77.0-78.0m = 10.65g/t Au
INCL 75.00 78.00 3.00 4.07  
KKRC510 18.00 21.00 3.00 2.07  
AND 27.00 30.00 3.00 1.11  
KKRC511 77.00 88.00 11.00 0.85  
KKRC512 0.00 3.00 3.00 1.23  
AND 64.00 97.00 33.00 1.00  
INCL 64.00 68.00 4.00 5.16  
KKRC529 42.00 44.00 2.00 11.35 43.0-44.0m = 21.9g/t Au
KKRC545 43.00 44.00 1.00 5.62  
KKRC548 12.00 16.00 4.00 1.43  
KKRC549 37.00 38.00 1.00 5.51  
KKRC561 42.00 43.00 1.00 3.94  
KKRC576 54.00 66.00 12.00 2.43 55.0-56.0m = 18.65g/t Au
INCL 55.00 59.00 4.00 6.91  
AND 16.00 19.00 3.00 2.28  
AND 25.00 28.00 3.00 3.19  
KKRC652 46.00 54.00 8.00 1.25  
INCL 50.00 53.00 3.00 2.16  
KKRC653 63.00 65.00 2.00 7.36 63.0-64.0m = 14.35g/t Au
KKRC654 1.00 14.00 13.00 0.92  
AND 12.00 13.00 1.00 6.38  
AND 68.00 70.00 2.00 11.86 68.0-69.0m = 15.35g/t Au
KKRC656 28.00 38.00 10.00 6.46  
INCL 32.00 36.00 4.00 15.63 34.0-35.0m = 19.35g/t Au; 35.0-36.0m = 40.3g/t Au
AND 49.00 54.00 5.00 5.48 52.0-53.0m = 15.15g/t Au; 53.0-54.0m = 11.3g/t Au
INCL 52.00 54.00 2.00 13.23  
AND 71.00 75.00 4.00 3.31 72.0-73.0m = 10.2g/t Au
KKRC666 28.00 34.00 6.00 1.02  
INCL 30.00 34.00 4.00 1.375  
KKRC668 0.00 6.00 6.00 5.07 3.0-4.0m = 21.0g/t Au
KKRC669 32.00 34.00 2.00 4.46  
KKRC681 33.00 35.00 2.00 3.32  
KKRC682 25.00 36.00 11.00 3.12 26.0-27.0m = 21.9g/t Au
INCL 25.00 31.00 6.00 5.35  
AND 66.00 75.00 9.00 0.80 ended in mineralization

Notes on Table 1:

  1. Intervals are core length. True width is unknown at this time.
  2. Intersections are based on a 0.3 g/t gold cut-off with maximum internal dilution (MID) of 5m for the lower grade mineralization envelope.
  3. In order to highlight the continuity of the high grade zone, a 0.8 g/t gold cut-off with maximum internal dilution of 2m has been used.
  4. No top cut has been applied.
  5. The intersections listed in the table represent sections of at least 1m in excess of 5g/t Au, 2m in excess of 3g/t Au, 3m in excess of 1g/t Au and/or sections of at least 10m in excess of 0.5g/t Au.
  6. The intersections represent sections drilled by reverse circulation (RC) and/or cored drilling (see Table 2).
  7. The RC portions of the drill holes were sampled at 1m intervals. Dry samples were riffle-split to provide 2 kg samples sent to the laboratory. Wet samples were dried in the field, then riffle-split in the same way. The cored portion of the drill holes were sampled at one meter intervals and cut in half using a diamond saw. Half-core is archived at the core storage facility on site while the other half was sent to the laboratory.
  8. Samples were then sent to ALS Chemex and/ or Actlabs in Ouagadougou for Fire Assay on a 50g charge.
  9. Certified standards were inserted every 15 samples, field duplicates (in the RC portions) about every 25 and blanks about every 10 samples. The blanks, certified standards and duplicate assays confirm that all assays used to compile the intersections quoted here have passed Volta Resources's rigorous QA/QC checks.

The reported drill holes are part of the on-going Phase 4 program of the Kiaka Gold Project. Phase 4 comprises approximately 60,000m of drilling, targeted to delineate and better define the Kiaka South Area Mineralization.  This program also includes some drilling to test the area comprised between the Kiaka South Area and the Kiaka Central Area.

The balance of the results from the remaining holes drilled will be processed and fed into a gelogical model being developed in order to complete a NI43-101 compliant resource estimation for Kiaka South.  The model is being developed with the assistance of SRK Consulting (Cardiff).

TABLE 2 : Collar coordinates and orientation parameters

HOLEID SECTION UTM_X UTM_Y UTM_Z DEPTH (m) DrillType
KKRC532 3625N 737971 1288350 270 60.00 RC
KKRC533 737989 1288332 270 60.00 RC
KKRC534 738006 1288315 270 60.00 RC
KKRC535 738024 1288297 270 60.00 RC
KKRC536 738042 1288279 270 60.00 RC
KKRC537 738059 1288262 270 60.00 RC
KKRC538 738077 1288244 270 60.00 RC
KKRC539 738095 1288226 270 60.00 RC
KKRC540 738112 1288209 270 60.00 RC
KKRC541 738130 1288191 270 60.00 RC
KKRC542 738148 1288173 270 60.00 RC
KKRC543 738183 1288138 270 60.00 RC
KKRC544 738236 1288085 270 60.00 RC
KKRC545 738254 1288067 270 60.00 RC
KKRC546 738272 1288050 270 60.00 RC
KKRC547 738219 1288103 270 60.00 RC
KKRC548 738201 1288120 270 60.00 RC
KKRC550 738166 1288156 270 60.00 RC
KKRC517 3675N 738006 1288385 270 100.00 RC
KKRC519 738042 1288350 270 60.00 RC
KKRC520 738059 1288332 270 60.00 RC
KKRC521 738077 1288315 270 60.00 RC
KKRC522 738095 1288297 270 60.00 RC
KKRC523 738112 1288279 270 60.00 RC
KKRC524 738130 1288262 270 60.00 RC
KKRC525 738148 1288244 270 60.00 RC
KKRC526 738166 1288226 270 60.00 RC
KKRC528 3700N 738226 1288201 270 100.00 RC
KKRC530 738286 1288141 270 115.00 RC
KKRC549 738342 1288085 270 100.00 RC
KKRC527 738196 1288232 270 100.00 RC
KKRC529 738257 1288171 270 100.00 RC
KKRC531 738318 1288110 270 100.00 RC
KKRC507 3725N 738335 1288127 270 100.00 RC
KKRC508 738304 1288158 270 115.00 RC
KKRC509 738243 1288219 270 100.00 RC
KKRC510 738213 1288249 270 100.00 RC
KKRC511 738183 1288280 270 100.00 RC
KKRC512 738274 1288188 270 100.00 RC
KKRC513 738155 1288308 270 100.00 RC
KKRC514 738041 1288422 270 100.00 RC
KKRC515 738098 1288365 270 100.00 RC
KKRC516 738127 1288336 270 100.00 RC
KKRC518 738070 1288393 270 100.00 RC
KKRC506 738361 1288103 270 100.00 RC
KKRC558 3750N 738377 1288120 270 100.00 RC
KKRC505 738059 1288439 270 106.00 RC
KKRC556 738328 1288170 270 90.00 RC
KKRC557 738353 1288145 270 75.00 RC
KKRC501 738173 1288326 270 100.00 RC
KKRC502 738145 1288354 270 100.00 RC
KKRC503 738117 1288382 270 100.00 RC
KKRC504 738088 1288411 270 100.00 RC
KDH429 3775N 738219 1288315 270 175.10 DD
KKRC559 738346 1288187 270 100.00 RC
KKRC560 738370 1288163 270 100.00 RC
KKRC561 738395 1288138 270 100.00 RC
KKRC497 738191 1288343 270 100.00 RC
KKRC498 738163 1288371 270 100.00 RC
KKRC499 738135 1288399 270 100.00 RC
KKRC500 738106 1288428 270 100.00 RC
KKRC562 3800N 738362 1288204 270 100.00 RC
KKRC563 738387 1288179 270 100.00 RC
KKRC564 738412 1288155 270 100.00 RC
KKRC565 738440 1288127 270 100.00 RC
KDH425 738226 1288341 270 205.07 DD
KKRC620 738088 1288479 270 100.00 RC
KKRC566 3825N 738381 1288222 270 100.00 RC
KKRC568 738431 1288172 270 100.00 RC
KKRC569 738459 1288144 270 100.00 RC
KDH427 3837.5N 738227 1288394 270 111.00 DD
KDH432 738210 1288412 270 172.13 DD
KKRC570 3850N 738378 1288261 270 100.00 RC
KKRC571 738414 1288225 270 100.00 RC
KKRC572 738449 1288189 270 100.00 RC
KKRC621 738102 1288537 270 90.00 RC
KKRC622 738130 1288509 270 69.00 RC
KKRC623 738149 1288490 249 50.00 RC
KKRC624 738166 1288473 270 100.00 RC
KDH433 3862.5N 738245 1288412 270 120.82 DD
KDH440 3887.5N 738263 1288430 270 181.00 DD
KKRC573 3900N 738481 1288227 270 100.00 RC
KKRC574 738446 1288262 270 100.00 RC
KKRC575 738411 1288297 270 100.00 RC
KKRC576 738324 1288384 270 100.00 RC
KKRC577 738201 1288508 270 100.00 RC
KKRC578 738165 1288543 270 100.00 RC
KKRC579 738130 1288579 270 100.00 RC
KDH439 3912.5N 738280 1288447 270 172.00 DD
KKRC652 738298 1288430 270 100.00 RC
KDH437 3937.5N 738280 1288483 270 190.12 DD
KDH438 738298 1288465 270 180.95 DD
KKRC653 738316 1288447 270 75.00 RC
KKRC682 738333 1288430 270 75.00 RC
KKRC580 3950N 738165 1288616 270 100.00 RC
KKRC581 738201 1288580 270 97.00 RC
KKRC582 738236 1288544 270 100.00 RC
KKRC583 738520 1288262 270 100.00 RC
KKRC584 738486 1288296 270 100.00 RC
KKRC585 738450 1288331 270 100.00 RC
KKRC600 738412 1288367 270 100.00 RC
KDH441 3962.5N 738298 1288500 270 181.14 DD
KKRC654 738333 1288465 270 84.00 RC
KKRC681 738351 1288447 270 75.00 RC
KDH421 3975 738278 1288537 270 225.70 DD
KDH442 3987.5N 738316 1288518 270 181.11 DD
KKRC656 738333 1288500 270 75.00 RC
KKRC657 738351 1288483 274 75.00 RC
KKRC680 738369 1288465 270 75.00 RC
KDH381 4000N 738448 1288403 270 250.30 DD
KKRC586 738201 1288649 270 95.00 RC
KKRC587 738236 1288614 270 90.00 RC
KKRC590 738554 1288297 270 100.00 RC
KKRC591 738518 1288332 270 100.00 RC
KKRC592 738483 1288368 270 100.00 RC
KKRC593 738448 1288403 270 100.00 RC
KDH443 4012.5N 738333 1288536 270 190.05 DD
KKRC659 738369 1288501 274 75.00 RC
KKRC679 738386 1288483 270 75.00 RC
KDH419 4025N 738254 1288633 270 225.87 DD
KDH420 738289 1288598 270 120.84 DD
KDH444 4037.5N 738351 1288553 270 181.08 DD
KKRC660 738298 1288606 270 75.00 RC
KDH417 4050N 738235 1288685 270 250.20 DD
KDH418 738264 1288657 270 202.20 DD
KKRC589 738260 1288660 270 100.00 RC
KKRC342 738343 1288580 273 273.01 RC
KKRC663 4062.5N 738316 1288624 270 100.00 RC
KDH413 4075N 738235 1288720 270 250.18 DD
KDH416 738271 1288685 270 202.26 DD
KKRC347 738396 1288562 275 274.61 RC
KKRC346 738378 1288580 275 274.58 RC
KKRC343 738325 1288633 274 274.16 RC
KKRC345 738360 1288598 274 274.28 RC
KKRC344 738343 1288616 275 274.5 RC
KKRC664 4087.5 738298 1288677 270 77.00 RC
KDH414 4100N 738278 1288713 270 150.95 DD
KDH415 738243 1288748 270 250.40 DD
KKRC594 738448 1288545 270 100.00 RC
KKRC595 738519 1288474 270 100.00 RC
KKRC596 738554 1288438 270 97.00 RC
KKRC597 738589 1288403 270 100.00 RC
KKRC598 738624 1288367 270 100.00 RC
KKRC599 738483 1288509 270 100.00 RC
KKRC348 738307 1288686 273 273.46 RC
KKRC349 738325 1288669 274 273.63 RC
KKRC352 738414 1288580 275 274.65 RC
KKRC350 738343 1288651 274 273.9 RC
KKRC351 738378 1288615 274 273.86 RC
KKRC665 4125N 738378 1288651 270 100.00 RC
KKRC666 738448 1288580 270 100.00 RC
KKRC356 738343 1288686 274 273.5 RC
KKRC353 738290 1288739 273 272.85 RC
KKRC354 738307 1288721 273 273.09 RC
KKRC355 738325 1288704 273 273.34 RC
KKRC667 4150N 738289 1288774 270 100.00 RC
KKRC668 738325 1288739 270 78.00 RC
KKRC669 738360 1288704 270 100.00 RC
KKRC670 738395 1288668 270 120.00 RC
KKRC671 738431 1288633 270 100.00 RC
KKRC672 738466 1288598 270 100.00 RC
KKRC642 4175N 738378 1288721 270 100.00 RC
KKRC643 738413 1288686 270 100.00 RC
KKRC644 738448 1288651 270 100.00 RC
KKRC645 738484 1288615 270 110.00 RC
KKRC601 4200N 738391 1288734 270 100.00 RC
KKRC602 738426 1288699 270 100.00 RC
KKRC603 738462 1288664 270 100.00 RC
KKRC604 738497 1288628 270 100.00 RC
KKRC605 738532 1288593 270 100.00 RC
KKRC606 738568 1288557 270 100.00 RC
KKRC607 738603 1288522 270 100.00 RC
KKRC608 738638 1288487 270 100.00 RC
KKRC609 738674 1288451 270 100.00 RC

All holes, except KDH381 (oriented N315°E), were oriented N135°E and drilled with an inclination of -55°.

Under the guidelines of National Instrument 43-101, the qualified person for the Kiaka Gold Project is Mr. Guy Franceschi, Vice President, Exploration for Volta Resources. Mr. Franceschi is a member of the European Federation of Geologists and has reviewed and approved the contents of this news release.

Volta Resources has a portfolio of quality gold exploration projects in Burkina Faso and Ghana, both mining-friendly West African jurisdictions with proven world-class gold deposits.  VTR will focus on fast-tracking its flagship Kiaka Gold Project (NI-43-101 compliant resources include 117.42 million tonnes @ 1.07 g/t Au for 4,029,000 ounces in the Measured and Indicated categories and 29.96 million tonnes @ 1.00 g/t Au for 1,000,000 ounces in the Inferred category [Please see VTR press release dated March 21, 2012] including 34.38 million tonnes @ 1.04 g/t Au for 1,145,969 ounces of gold in the Proven category and 91.70 million tonnes @ 0.93 g/t Au for 2,742,353 ounces of gold in the Probable category [Please see VTR press release dated May 3, 2012]) towards a development decision, aiming to complete a Feasibility Study in Q1, 2013. Recent acquisition of properties around Kiaka have provided VTR with an extensive ground position along the highly prospective Markoye Fault Corridor in an important emerging gold province.

Forward Looking Information Caution:

This press release presents "forward-looking statements" within the meaning of Canadian securities legislation that involve inherent risks and uncertainties.  Forward-looking statements include, but are not limited to, statements with respect to the future price of gold and other minerals and metals, the estimation of mineral reserves and resources, the realization of mineral reserve estimates, the capital expenditures, costs and timing of the resources, the realization of mineral reserve estimates, the capital expenditures, costs and timing of the development of new deposits, success of exploration activities, permitting time lines, currency exchange rate fluctuations, requirements for additional capital, government regulation of mining operations, environmental risks, unanticipated reclamation expenses, title disputes or claims and limitations on insurance coverage.  Generally, these forward-looking statements can be identified by the use of forward looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking statements are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Volta Resources to be materially different from those expressed or implied by such forward looking statements, including but not limited to: risks related to international operations, risks related to the integration of acquisitions; risks related to joint venture operations; actual results of current exploration activities; actual results of current or future reclamation activities; conclusions of economic evaluations; changes in project parameters as plans continue to be refined; future prices of gold and other minerals and metals; possible variations in ore reserves, grade or recovery rates; failure of equipment or processes to operate as anticipated; accidents, labour disputes and other risks of the mining industry; and delays in obtaining governmental approvals or financing or in the completion of development or construction activities.  Although the management and officers of Volta Resources believe that the expectations reflected in such forward-looking statements are based upon reasonable assumptions and have attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.  Volta Resources does not undertake to update any forward-looking statements that are incorporated by reference herein, except in accordance with applicable securities laws.

 

Image with caption: "Figure 1: Location and highlights of holes from Table 1 (CNW Group/Volta Resources Inc.)". Image available at: http://photos.newswire.ca/images/download/20120829_C2383_PHOTO_EN_17330.jpg

SOURCE: Volta Resources Inc.

For further information, please refer to our website www.Voltaresources.com or contact:

Kevin Bullock, P.Eng., President & CEO     
Tel:  (647) 388-1842
Fax: (416) 867-2298
Email: [email protected] 

or
Andreas Curkovic, Investor Relations
Tel: (416) 577-9927

Organization Profile

Volta Resources Inc.